dLive MixPad vs DiGiCo S

dLive MixPad is an engineer’s mixing tool providing wireless mobile control for the Allen & Heath dLive digital mixing system. It gives you the freedom to walk the room or stage and control the sound right where it is needed. dLive MixPad and the dLive Surface can work together to provide simultaneous control of independent functions, for example one engineer using the Surface to mix front-of-house sound, and another using the iPad to mix monitors on stage. Several iPads can be connected, each providing independent control. dLive MixPad is intended for working with the live mix and channel processing. Things you can control: - Fader levels, mutes, pan - Aux and FX sends, routing and Pre/Post switching - FX Tap Tempo, Global Tap Tempo - Matrix sends, routing and Pre/Post switching - DCAs and assignments - Preamp Gain, Pad and 48V - Trim and Polarity - HPF, Gate/Ducker/Expander, PEQ, NEQ, Comp/Ducker, Delays - RTA function - Channel names and colour - PAFL select - Full signal metering - 3 Custom strips for personalised channel layout - Library and Scene recall dLive MixPad is not intended for system setup. The following functions are not available at the iPad: - FX parameter control - Input source, insert and output patchbay - Channel ganging - Aux source routing options - Show store and recall - Scene Recall Filters and Safes edit - Talkback - System configuration, options and preferences - User Profile management and permissions Requirements An Allen & Heath dLive mixing system with a suitable wireless router or access point connected to one of its Network ports. This version of MixPad can connect to a dLive mixing system running: - dLive Firmware V2.10 or subsequent V2.1x maintenance releases. - dLive Firmware V2.00 or subsequent V2.0x maintenance releases, when the Firmware compatibility mode setting is enabled. This can be found in the iOS Settings / dLive MixPad. You will need to shut down (force quit) the app and restart it for changes to take effect.

Set yourself free with the DiGiCo S-Series app. It has been designed to be compatible with DiGiCo's S21 and S31 The DiGiCo S App requires V1.4+ of S-Series console software and the iPad connection must be configured on the console. It is not compatible with earlier versions of S-Series software The DiGiCo S app is the perfect way to control your DiGiCo S-Series console straight from your Apple iPad. It allows remote, wireless control of any DiGiCo S-Series mixing console, both S21 and S31, wherever you are. The DiGiCo S App permanently displays an overview of the console layout, so you can select any available console bank and have the same user-friendly operation you’re already familiar with, but without being tied to your console. What you can control: Channel Setup - +48V, polarity, analogue gain, digital trim, channel delay, insert points on/off, meters Mix – channel label, pan, mute, solo, fader level, meters EQ – 4 band EQ plus HPF/LPF Dynamics – all dynamics parameters for all console dynamics modes Auxes – auxiliary send levels, on/off, auxiliary pans Buss Routing – assignment of channels to busses Snapshots – insert new, recall, update, delete Matrix – sends, on/off Graphic EQ – 32 faders and on/off for each unit, flatten all bands Save Session There is also an overview mode for selecting the Bank that you wish to control. Tap the arrow down symbol in the top right corner of the main view Connection details can be saved for different devices Aux Select buttons can (optionally) activate the Solo function for the relevant Aux Channels. Tap the Aux Menu button a second time to activate/deactivate this function.