4K Integral Total Control Early Version vs Bluetooth+ for Blackmagic

This APP request Bluetooth authorization and SD card/file writing permission. It will allow you to control and operate your HDfury Integral and your Home Theater setup It can perform the following: - Reset/HPD. - Read/Modify and Upload Configuration. - Switch Input channel. - Set Auto switching mode. - Set Input Priority mode. - Turn Logo LED and Blue LEDs ON/OFF. - Turn Beta AVR Mode ON/OFF - Set Automix enforceable flags (Stereo, 5.1, Full Sound, YCbCr, BT2020, 3D Remove, HDR) - Set Automix Algo with Min Mixed Capabilities, Max Audio/Min Video, Top Output Priority, Max Audio/Max Video. - Enter/Exit Matrix mode. - Define HDCP rules and fix HDCP error. - Sound input/output selection. - Mute/Unmute all sound output from Integral - Control your display HDR mode with HDR Force Mode ON/OFF, Samsung HDR enable, Full HDR mode enable, HDR Hotkey ON/OFF - Set CEC device with Video Processor or Audio System with ARC. - EDID table selection with 25 EDID Banks (list below) - Convert 4K60 4:4:4 > 4K60 4:2:0 - Send live CEC command to the HDMI/CEC network. - Setup CEC rules and access CEC customs commands. - Define CEC press button (Short and Long press) - Display current link speed and infoframe information. - Display incoming signal information. - Display active link(s). List of Custom EDID banks available: 1 - Custom Uploaded/Default EDID 2 - 4k60-444 600MHz HDR BT.2020 All Sound 3 - 4k60-444 600MHz HDR BT.2020 Stereo 4 - 4k60-444 600MHz All Sound 5 - 4k60-444 600MHz Stereo 6 - 4k50-444 600MHz HDR BT.2020 All Sound 7 - 4k50-444 600MHz HDR BT.2020 Stereo 8 - 4k60-420 12-bit HDR BT.2020 All Sound 9 - 4k60-420 12-bit HDR BT.2020 Stereo 10 - 4k60-420 12-bit BT.2020 All Sound 11 - 4k60-420 12-bit BT.2020 Stereo 12 - 4k60-420 8-bit 300MHz All Sound 13 - 4k60-420 8-bit 300MHz Stereo 14 - 4k30-444 300MHz All Sound 15 - 4k30-444 300MHz Stereo 16 - 4k30-RGB 300MHz All Sound 17 - 4k30-RGB 300MHz Stereo 18 - 4k24-422 12-bit BT.2020 All Sound 19 - 4k24-422 12-bit BT.2020 Stereo 20 - 1080p-444 148MHz All Sound 21 - 1080p-444 148MHz HDR Stereo 22 - 1080p24-444 All Sound 23 - 1080p24-444 Stereo 24 - 1080I-444 All Sound 25 - 1080I-444 Stereo You can pair, connect and use the Bluetooth APP even when no signals is going through the Integral, in such conditions, the Bluetooth range is over >20m. However, the Bluetooth range will be highly affected by the resolution in use because of EMI, below you can find the average working distance for Bluetooth based on the processed signal resolution and refresh rate. 1080p60 and below: Bluetooth working range is about 10 meters. 4K60 4:2:0 and below: Bluetooth working range is about 5 meters. 4K60 4:4:4: Bluetooth working range is about 2 meters. (We recommend using IR for wireless control in 600MHz)

-- NEW External Controllers -- Connect Tilta Nucleus Nano & Nucleus-M to control Focus, Iris and Zoom, as well as Start & Stop Recording. Zoom and Focus control supported on Pocket 4K only. This is part of the new Pro feature set, which also includes Multi-Cam mode. -- MULTI-CAM MODE -- Multi-Cam Mode is now part of the Pro feature set, and includes these fantastic features: • Control up to 12 Blackmagic cameras at once • Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras • You can choose to have changes made on one camera automatically update all the other cameras in its Control Group, or control everything straight from Bluetooth+ • Give your cameras Nicknames to quick, easy control Multi-Cam gives you control over the following features synced across an entire Group: • Start/Stop Recording • White Balance + Tint • Project frame rate (off-speed frame rates not supported) • Shutter Angle/Speed • ISO • Overlays • Slate • Trigger Auto-focus You can still control all other settings on a camera-by-camera basis, including: • Trigger stills capture • Iris control • Focus + Zoom (on supported lenses) • Codec + Resolution • Playback control • You can also set ISO specifically, rather than by camera group And of course, everyone has access to all of these amazing features: • Follow Focus (limited support for EF Mount cameras). See below for more info • Zoom Control on supported lenses • Trigger Stills capture • Record Start/Stop • White Balance + Tint, including 5 helpful presets and Auto White Balance • Audio Controls • Trigger Autofocus (for supported electronic lenses with autofocus enabled on lens) • Off-speed frame rates • Aperture (for supported electronic lenses) • Shutter Angle • ISO • Auto-Exposure Control • Active Card • Power On/Off • Monitor Overlays • Codec & Resolution • Enter metadata in the Digital Slate (including location data from your iPhone or iPad if you give permission) • Control Lock - locks critical controls while recording, preventing accidental settings changes during takes -- Follow Focus -- You can now pull focus wirelessly right from your iPhone or iPad. There are some limitations outlined below. • Currently only fully supports Pocket 4K, but as of v1.4 we now have limited support for EF mount cameras - Pocket 6K, Ursa Mini Pro G1 & G2 • The camera does not supply the app with any information on the lenses current focus distance, so the app will not update in real time if you pull focus manually on the lens • Due to the nature of bluetooth, focus pulls may not be 100% smooth. It works well for nice slow pulls, but fast pulls my not feel entirely natural and organic. Unfortunately this is a limitation of the available technology. • On EF mount cameras, we can only offset focus from its current position, with no broader knowledge of where the lens is in its focus range. This means that focus marks are not possible. In addition, focus pulls on EF mount cameras can be quite jerky depending on the lens in use. -- Playback Control -- With Bluetooth+ you can control the playback of clips right from your iOS device. There are some notable limitations at this point. Currently you can: • Start playing a clip, either forwards or backwards • Navigate between clips, either forwards or backwards For now, you will not be able to: • Pause a clip that is already playing • Change the speed of a clip that is already playing • Control clip looping -- Zoom Control -- Control the zoom level on supported lenses. For the most part, this will only work on MFT lenses with electronic zoom. We are currently unaware of EF lenses that support this feature -- Slate-Only Mode -- As the name suggests, this feature locks the app into Slate-Only mode, without the ability to change critical camera settings or start/stop recording. This means you can let an assistant keep metadata up to date without the fear of interfering with important camera settings.