Bosch Leveling Remote App vs Pipefitter_Pro

The Bosch Levelling Remote app enables you to conveniently control your Bosch Professional levelling tool via Bluetooth® from your smartphone. Using the app, you can control the laser remotely without having to even touch it, thereby increasing productivity and efficiency in your daily levelling tasks. The app can be connected to all Bosch Professional levelling tools (line lasers, combi lasers and rotary lasers) which contain a "C" in the name, for example: • GCL 2-50 C/CG Professional • GCL100-80C/CG Professional • GLL 3-80 C/CG Professional • GLL3-330C/CG Professional • GRL 600 CHV Professional • GRL 650 CHVG Professional • GRL4000-80CHV Professional • GRL4000-80CH Professional • GRL4000-90CHVG Professional • GLL330-80CG Professional • GLL 18V-120-33 CG Professional Main functions when using a GCL or GLL device: • Conveniently control your combi / line laser by setting the operating mode, turning your tool into standby or changing the laser intensity to optimize the laser visibility or battery runtime. • Monitor your tool by checking the battery and device status via the app. • Check for potential external influences and calibration intervals to ensure the accuracy of your line laser (available for selected tools) Main functions when using a GRL device: • Easily control all main functions of your rotary laser such as setting slope, modifying the rotation speed, or putting your device into standby mode • Benefit from app-only features like setting up the partial projection (Mask Mode) or creation of Profiles to save and apply the setting you need • Check the accuracy of your tool and have it corrected automatically We are very pleased to receive your feedback and improvement suggestions for our application. Simply contact us via app.support@de.bosch.com and let us know if you have any wishes or problems – we are happy to help you!

Pipefitter Pro is a calculator for pipefitters. It calculates offsets, elbow angles and spool lengths, and draws what it works out. Choose a case from the menu, enter the pipe diameter and elbow radius on the workshop keypad, then read the available results: angles, the spool between elbows, elbow takeout, arc lengths and caliper dimensions. CASES AND VIEWS • BACK TO BACK — two elbows, with either the angle or the offset unknown. • S TYPE — offset, travel or a fixed 45° option. • TEE OFFSET — calculations that include the branch diameter. • CALCULATOR — one elbow cut out of a 90°. • 3D — two elbows in space, set using the A, B and C dimensions of a box. • SLIDER / SLIDER S TYPE / SLIDER TEE — change the angle and watch the offset change. • 3D SLIDER — set the elbow orientation in a spatial model and read the angles, the insert and the live box dimensions. The box is a visual reference, not a cut length. Depending on the case, results appear on the Angle, Dimensions and Elbow tabs; selected cases add a 3D view you can rotate and zoom. UNITS AND INPUT Lengths in millimeters, centimeters and inches. Feet-and-inches notation and decimal or fractional inches are also supported. Choose 1/16 or 1/32 precision for inch fractions. Angles are given in decimal degrees. The workshop keypad and fraction picker help you enter dimensions; add frequently used cases to favorites. PIPE AND ELBOW DIMENSIONS The DIMENSIONS tile opens the built-in NPS/DN table. It contains outside diameters and centerline radii for long-radius and short-radius elbows. Add and edit dimensions, then use them in calculations. Save a list backup to a file and restore the list from a backup. BEFORE YOU CUT Pipefitter Pro supports the preparation of workshop work. Check the dimensions against your technical documentation and your shop procedures before cutting and welding.