Sensor Configuration vs BAS

Configure, test and adjust Legrand Bluetooth™ enabled sensors from your mobile device, leaving your ladder behind! The Sensor Configuration app from Legrand, allows users (electrical contractors, installers, or facility managers) to easily manage outdoor Bluetooth™ Low Energy (BLE) sensor installations despite difficult weather, direct sunlight, height restrictions and other physical obstructions. No other specialized or additional hardware or tools are needed. Not only is it easier to configure than before, sensors are also faster to set up than ever before and end-users will know that their Bluetooth enabled wireless fixtures are secure in a mobile environment. No cellular service? No Wi-Fi? No worries. Once the app is installed, our use of BLE allows you to make adjustments to your Bluetooth enabled sensors anytime - offline and off the grid. Features: -Supported Sensors: FSP, FDP - Bluetooth device discovery with bidirectional communication - Basic sensor parameter settings include: high mode, low mode, time delay, cut off, and sensitivity - Advanced sensor parameter settings include: hold off, ramp up, fade down, and photocell - DALI supported parameters including: fade time, fade rate - Firmware updates - Editable profiles (reusable groups of parameter values for quick reuse fixture to fixture) - Password protected jobsite management - English, Spanish and French - Free to download

BAS-IP UKEY Config is an application for setting the parameters of the BAS-IP built-in readers with the built-in BLE (Bluetooth Low Energy) module, as well as individual BAS-IP UKEY desktop and wall readers with the built-in BLE module. Application features: · Adjustment of EM-Marine, MIFARE and BLE card operation modes - enabling and disabling of reading standards. · Setting the encryption for the BLE ID. This will make it possible to bind the identifiers encrypted key to the selected reader. · Enabling or disabling encryption modes for MIFARE Classic and MIFARE Plus cards. · Enabling diversification for MIFARE Classic and MIFARE Plus cards. · Configuring the audible confirmation when connecting mobile identifiers to the reader in standby and reading modes. · Setting the operating modes: Door, Touch, Gate/Barrier. · Setting the adjustable distance for the "Gate/Barrier" operating mode. · With the TR-03 reader, the configurator allows you to record MIFARE Classic and MIFARE Plus encryption cards. · Ability to save a file with settings for the specific reader. · Ability to upload a configuration file with settings to restore the reader parameters and for copying settings to other readers.