Sensor Configuration vs STEINEL DCS™ Legacy

Configure, test and adjust Legrand Bluetooth™ enabled sensors from your mobile device, leaving your ladder behind! The Sensor Configuration app from Legrand, allows users (electrical contractors, installers, or facility managers) to easily manage outdoor Bluetooth™ Low Energy (BLE) sensor installations despite difficult weather, direct sunlight, height restrictions and other physical obstructions. No other specialized or additional hardware or tools are needed. Not only is it easier to configure than before, sensors are also faster to set up than ever before and end-users will know that their Bluetooth enabled wireless fixtures are secure in a mobile environment. No cellular service? No Wi-Fi? No worries. Once the app is installed, our use of BLE allows you to make adjustments to your Bluetooth enabled sensors anytime - offline and off the grid. Features: -Supported Sensors: FSP, FDP - Bluetooth device discovery with bidirectional communication - Basic sensor parameter settings include: high mode, low mode, time delay, cut off, and sensitivity - Advanced sensor parameter settings include: hold off, ramp up, fade down, and photocell - DALI supported parameters including: fade time, fade rate - Firmware updates - Editable profiles (reusable groups of parameter values for quick reuse fixture to fixture) - Password protected jobsite management - English, Spanish and French - Free to download

This is the STEINEL DCS™ Commissioning App for the STEINEL Digital Control Solution™ line of products. The STEINEL DCS™ integrates load control with occupancy sensors, photo sensors and switches to provide simple code compliant solutions for lighting, plug load and HVAC integration through BACnet. Time saving wireless commissioning is accomplished via Bluetooth connection from a Smart Phone or Tablet to a STEINEL DCS™ Digital Controller, which communicates to the sensors and switches by the 2 wire bus. Key Features Include: • 3 x 20A Relays (expandable via BLE Mesh) • Current Monitoring Per Relay • 3 x 0-10v Dimming Zones • Multizone Daylight Harvesting • Partial On & Off • 20 A Receptacle Control • Use Cases • Demand Response Input • 24V External Input Signal • Internal Time Clock • Sequence of Operations • Min. & Max. manual dimming levels • Light Scenes • Wired data line • BLE MESH for groupings • BACnet • App Compatible to 3.0.6 R firmware