Sensor Configuration vs SensaBLE2.0

Configure, test and adjust Legrand Bluetooth™ enabled sensors from your mobile device, leaving your ladder behind! The Sensor Configuration app from Legrand, allows users (electrical contractors, installers, or facility managers) to easily manage outdoor Bluetooth™ Low Energy (BLE) sensor installations despite difficult weather, direct sunlight, height restrictions and other physical obstructions. No other specialized or additional hardware or tools are needed. Not only is it easier to configure than before, sensors are also faster to set up than ever before and end-users will know that their Bluetooth enabled wireless fixtures are secure in a mobile environment. No cellular service? No Wi-Fi? No worries. Once the app is installed, our use of BLE allows you to make adjustments to your Bluetooth enabled sensors anytime - offline and off the grid. Features: -Supported Sensors: FSP, FDP - Bluetooth device discovery with bidirectional communication - Basic sensor parameter settings include: high mode, low mode, time delay, cut off, and sensitivity - Advanced sensor parameter settings include: hold off, ramp up, fade down, and photocell - DALI supported parameters including: fade time, fade rate - Firmware updates - Editable profiles (reusable groups of parameter values for quick reuse fixture to fixture) - Password protected jobsite management - English, Spanish and French - Free to download

This configuration tool is used for modifying and testing the SensaBLE™ 2.0 Bluetooth enabled controller. SensaBLE™ 2.0 lighting controllers are mesh connected, providing additional zoning and network event capabilities. The configuration tool steps the user through the configuration process using menus and prompts, providing a simple way to customize the controller based on the site requirements. It can discover multiple SensaBLE™ 2.0 controllers and display them based on signal strength and distance. Once connected it can change the controller parameters such as motion control sensitivity, min/max output hold time, min/max output, daylight control, and more. With the configuration tool, a user has the ability save and upload a set of configuration parameters called Profiles. Profiles allow a user to easily assign the same configuration parameters to multiple SensaBLE™ 2.0 controllers without having to manually configure each one. Profiles are stored in the app and can be assigned to any controller at any site.