ActiveAhead 2018 vs LUXOMESH Commissioning

The ActiveAhead mobile application allows you to adjust the luminaire parameters of the self-learning, out-of-the-box lighting control solution ActiveAhead. To use this application you must have an approved mobile device, iPhone 4s / iPad 3rd gen onwards, equipped with Bluetooth low energy and one or multiple luminaires supporting the ActiveAhead solution. With this application you can adjust the values of a single luminaire or group of luminaires as well as control the daylight harvesting. The ActiveAhead includes the following features: - Light levels adjustments - Timeouts adjustment - Fade time adjustment - Set parameters to predefined eco and comfort modes or create your own presets. - Group management - Control daylight harvesting and set minimum dimming level - Security settings

In modern times commissioning a lighting control solution do not need to be time consuming and complicated anymore. To support you in saving time and energy, B.E.G. provides a set of tools for commissioning and monitoring qualified Bluetooth mesh lighting control devices. Using our intuitive web and mobile apps In the web app, most of the commissioning work can be done from anywhere in the world. By creating zones directly on your floorplan and using the predefined, customizable scenario profiles your configuration is done in no time. Complete the commissioning process on-site with the use of our app. It allows you to add B.E.G. Bluetooth mesh lighting control devices to a wireless network in no time. Its intuitive interface was designed to require as little work on your side as possible. Provisioning Thanks to proximity sensing, the app provides you with a list of detected LUXOMESH devices. Provision up to 5 devices at once. Using a RSSI filter, you can narrow down the list of visible devices to those that are the nearest. Customization If necessary, you can customize the previously selected scenario to your needs. Personalize follow up time, orientation light plus other lighting control parameters. If the requirements change it`s easy to adjust. Calibration Calibrate a light sensor in accordance with the measure provided by a light meter. Adjust brightness until it reaches the desirable level and enter the value. Test Test the performance of lighting control as well as the defined lighting scenes and make adjustments if needed.