HyperSynchron vs Teradek Launchpad

The HyperSynchron Deck Supervisor monitors up to 16 Decks and informs you when an error or a critical situation occurs on one or more Decks, optionally using voice output. Use the innovative Jog/Shuttle tool to control your playback. Setup your decks in the deck popup, format your storage media, set the base file name and see the clips contained on the media storage. Set the record timer to start and finish a recording automatically. Features: • tap on a function and control all decks at once • main usage of HyperSynchron is to monitor the recordings of an event, although it contains versatile play functionalities as well. • connect your HyperDecks with Wi-Fi or Ethernet to your iOS device • HyperSynchron informs you about all problems causing that decks are not operating synchronously anymore, like “no disk inserted”, “no input at recording start” or “disk full” • a smart Deck Supervisor permanently analyzes the status information from all connected decks and presents the relevant part in a single display. It monitors if all decks are in the state requested and whether a deck’s remaining recording capacity gets below certain limits. • information is displayed graphically and optionally acoustically using spoken messages in clear English • connect your iOS device running HyperSynchron via audio out to an intercom system, hear all warnings and you can concentrate on your main job, e.g. vision mixing, In case you missed a message due to hustle and bustle in live operation, it can be repeated with a single tap. • The recorded clips on SSD / SD card are displayed and accessible in a list. Tapping on a list item tells the deck to jump to the first frame of it. • You can wind fast forward and backward in clips using the innovative Jog/Shuttle control. You decide whether you control all decks at once or only a single one. Use the additional pause button to control your HyperDecks in traditional VTR-mode. • In single deck window you can use all setup options provided by Blackmagic like slot, recording, video and audio options, formatting storage media, setting base clip name. • integrated timer functionality: A very helpful feature to set a time for start (and optionally end) of recording, so the decks begin automatically to record. We all know how much hectic there is before a live event starts and to set all decks to record mode easily gets forgotten. That’s history now. The speech assistant informs you about a successful or unsuccessful start of recording.

Manage every parameter of your Orbit PTZ system from the convenience of your smartphone. Pairing - Pair transmitters and receivers right from your iPhone or iPad. PTZ Camera Control - Configure your PTZ camera settings, such as pan, tilt, zoom, focus, etc... with your phone. No camera control unit is needed to enable this function in the app. Spectrum Analyzer - Scan local wireless spectrum and configure the optimal 5GHz channel for your Orbit PTZ. Channel Selection - Manually select a 5GHz (40 MHz) channel. Orbit PTZ can also be set to operate over 20 MHz channels for better wireless performance. Quality/Range Analyzer - Monitor the quality and range of your wireless link. 3D LUT Selection - Achieve the look you’re after with Orbit PTZ’s integrated 3D LUT technology. Select from LUT presets or upload your own into the app. Quality Selection - Choose between several modes of operation: Maximum Quality, Maximum Range and Balanced. Output Format - Select the output resolution and framerate. Test Pattern - Output a test pattern. Audio Settings - Enable a tone to ring when camera recording is triggered, or mute sounds on the device. Display Settings - Adjust display light output. System Info - Check the current firmware version and apply updates when available. Also performs factory resets directly from the app.