NFC Tools vs Tiny Intercom

NFC Tools can read and write your NFC tags with a simple and lightweight user interface. By passing your device near an NFC chip, you can read the data it contains and interact with the content. The "Read" section allows you to see data such as: - the maker of the tag - the type of tag (ex : Mifare Ultralight, NTAG213) - the norm of the tag (ex : NFC Forum Type 2) - the available technology (ex: NFC A) - its serial number (ex : 04:85:c8:5a:40:2b:80) - the size of the tag and of the data on it - if you can write on the tag - all the data on the tag (NDEF format) NFC Tools can record standard information on your tags which will be compatible with any NFC device. For instance, you can store a VCARD to share your contact details easily, open an URL, share a phone number or even a geolocation. The "Write" section let you record standardised data such as: - a simple text - a link to a website - an email - a contact - a phone number - a predefined text message - an address or geolocation - a WiFi or Bluetooth configuration - personalised data - and more... The write function allows you to add as much data as you wish. This way you can record large quantities of information on your tag. The app also allows you to save the contents of your chip for later access. NFC Tools has been tested with the following NFC tags: - NTAG 203, 210, 210u, 212, 213, 213TT, 215, 216, 413 DNA, 424 DNA - Ultralight, Ultralight C, Ultralight EV1 - ICODE SLI, SLI-S, SLIX, SLIX-S, SLIX-L, SLIX2, DNA - DESFire EV1, EV2, EV3 - ST25TV, ST25TA - Felica If you encounter any problem, don’t hesitate to contact us. Notes: - Compatible from iPhone 7. - Use the "compatibility" mode to read/write Mifare Classic tags.

Repurpose an old, unused iPhone/iPad into an audio intercom. Install the app on both your regular device and the unused one, put the unused device in a remote room in your house and you will be able to talk to whoever is in that room from your phone. No more yelling or walking over! The app can run in two modes: terminal and controller. The terminal is what you put in the remote room. In this mode, the app runs continuously (turning the screen off is OK), transmitting audio in both directions. The controller mode is for your everyday phone, tablet or Mac. In this mode, you can connect to terminals to listen and talk through them. The app works entirely on your local network, with no accounts, servers or cloud services involved. Connecting to a terminal requires pairing using an access code that is visible only on the terminal. All communications between controllers and terminals are encrypted. You can have as many terminals and controllers as you wish. Multiple controllers can connect to the same terminal at the same time (and speak together), and a controller can connect to multiple terminals (but not at the same time). If desired for privacy or other reasons, it is possible to set a terminal to an "announcement only" mode where you can speak via the terminal but not listen to it. Toggle "Mute microphone in terminal" in the iOS app settings to activate this mode. TIP: You can use Apple Configurator to lock your terminal device into a “single app mode” (aka kiosk mode) to make it run just the intercom terminal app and not allow switching out of it. Features and requirements: • Audio only. This app does not support video. • All devices must be on the same local Wi-Fi network to communicate. • In order to connect to a terminal, a controller must first be paired with it. The pairing code is displayed on the terminal (press the "key" button) and can be scanned as a QR code or entered manually in the controller app.  • The app can also run in either controller or terminal mode on Apple Silicon Macs. • A companion Apple Watch app lets you connect to terminals from your wrist. See below for watch app functionality and limitations. • There are no in-app purchases or ads of any kind. • Versions of this app are available for other platforms in case you have a mix of iOS and other devices. See the developer site for details. Apple Watch support: The companion watch app can be used as a controller to connect to terminals, but not as a terminal. Please note: • The paired phone must be on, nearby and connected to the local network where your terminals are. • New terminals must be paired from the phone first. The watch app itself is unable to pair. • Updates to terminal names or availability may take a moment to appear on the watch. They are not as instantaneous as on the phone. • The UI when connected to a terminal is the standard Apple Watch "in-call" UI rather than a custom one as on the phone. Just like on the phone, you can either listen or talk, but not at the same time. Tap the "mute" button to switch between listening and talking. • The watch app is not available in countries/territories that prohibit use of the Apple CallKit framework. If you start the watch app in such a country/territory, you will receive a "This app is not available in your country or region" error message.