NFC Tools vs SUVA 珠宝标尺

NFC Tools can read and write your NFC tags with a simple and lightweight user interface. By passing your device near an NFC chip, you can read the data it contains and interact with the content. The "Read" section allows you to see data such as: - the maker of the tag - the type of tag (ex : Mifare Ultralight, NTAG213) - the norm of the tag (ex : NFC Forum Type 2) - the available technology (ex: NFC A) - its serial number (ex : 04:85:c8:5a:40:2b:80) - the size of the tag and of the data on it - if you can write on the tag - all the data on the tag (NDEF format) NFC Tools can record standard information on your tags which will be compatible with any NFC device. For instance, you can store a VCARD to share your contact details easily, open an URL, share a phone number or even a geolocation. The "Write" section let you record standardised data such as: - a simple text - a link to a website - an email - a contact - a phone number - a predefined text message - an address or geolocation - a WiFi or Bluetooth configuration - personalised data - and more... The write function allows you to add as much data as you wish. This way you can record large quantities of information on your tag. The app also allows you to save the contents of your chip for later access. NFC Tools has been tested with the following NFC tags: - NTAG 203, 210, 210u, 212, 213, 213TT, 215, 216, 413 DNA, 424 DNA - Ultralight, Ultralight C, Ultralight EV1 - ICODE SLI, SLI-S, SLIX, SLIX-S, SLIX-L, SLIX2, DNA - DESFire EV1, EV2, EV3 - ST25TV, ST25TA - Felica If you encounter any problem, don’t hesitate to contact us. Notes: - Compatible from iPhone 7. - Use the "compatibility" mode to read/write Mifare Classic tags.

SUVA 珠宝标尺是一款面向珠宝设计与尺寸沟通的图片测量工具。导入照片，用已知长度校准比例，再为戒指、宝石或首饰细节添加尺寸标注，让设计讨论有清楚的参照。 先校准，再测量 在图片上标出一段已知长度，输入真实毫米数，即可校准图片与关联测量的比例。沿需要测量的位置绘制线段，记录长度并为测量命名。 放大细看，微调端点 在无限画布上平移、缩放图片，借助局部放大镜对齐边缘。校准后可按 0.1 mm 步长微调端点，让标记位置更容易调整。 把标注排清楚 拖动尺寸标签，将尺寸线平行移到物体外侧，减少对图片细节的遮挡；调整标注位置时，测量端点与长度保持不变。 多个项目，分别保存 按项目保存图片、校准比例与测量，支持新建、重命名与切换项目。需要重新测量时，可以保留图片和校准比例，清空当前测量线后继续工作。 导出并分享 选择导出范围，将图片与尺寸标注导出为 PNG，通过系统分享功能用于设计沟通和记录。项目保存在设备本地，无需注册或登录。 使用提示 照片测量结果取决于拍摄角度、参考尺寸与端点选择。建议使用正对物体拍摄、参照与测量对象处于同一平面的图片。0.1 mm 是微调步长，并非测量精度保证；实际尺寸应以实物测量为准。