Car Scanner ELM OBD2 vs LeLink Security

Check what your car is doing in realtime, get OBD fault codes, car performance, sensor data and more! Car Scanner is a vehicle / car performance / trip computer / diagnostics tool and scanner that uses an OBD II Wi-Fi or Bluetooth 4.0 (Bluetooth LE) adapter to connect to your OBD2 engine management / ECU. Car Scanner gives you a bunch of unique features: 1) Layout your own dashboard with the gauges and charts you want! 2) Add custom (extended PIDs) and get information, that was hidden from you by car manufacturer! 3) It can also show and reset a DTC fault code like a scantool. Car Scanner includes a huge database of DTC codes descriptions. 4) Car Scanner allows you to read free-frames (sensors state when DTC is saved). 5) Now with Mode 06 - you can get ECU self-monitoring test results. Helps you fix your car and helps keep repair costs down! 6) Check if your car is ready for emission tests. 7) Check all of the sensors at one screen 8) Car Scanner works with any vehicle that uses the OBD 2 standard (most vehicles built after 2000, but can work for vehicles as far back as 1996, check carscanner.info for more details). 9) Car Scanner includes a lot of connection profiles, that gives you some extra features for Toyota, Mitsubishi, GM, Opel, Vauxhal, Chevrolet, Nissan, Infinity, Renault, Dacia, Hyundai, Kia, Mazda, Volkswagen, Audi, Skoda, Seat, BMW and many others. 10) Car Scanner dashboard includes a HUD mode, that you can use to project data to your windshield. 11) Car Scanner provides a tool for very accurate acceleration measurments (0-60, 0-100, etc.) 12) Car Scanner can be used as a trip computer and can show you fuel consumption statistics! 13) For cars of the VAG group (Volkswagen, Audi, Skoda, Seat), built on the MQB and PQ26 platforms, encoding functions are available - setting hidden parameters of the car. 14) And one more thing - Car Scanner provides the widest variety of features for FREE across the App Store. The app requires a Wi-Fi or or Bluetooth 4.0 (Bluetooth LE) OBD2 ELM327 compatible adapter (device) to work. ELM327 devices plugs into the diagnostics socket in the car ang gives your phone access to car diagnostics. Recommended adapters brands: Kiwi 3, Viecar, V-Gate, Carista, LELink, Veepeak. If you buy one of the cheap china OBD2 ELM327 adapters from ebay / amazon, then make sure it’s not marked as v.2.1. This adapters are supported, but they have lot’s of bugs. PLEASE NOTE: Vehicle ECUs vary in the amount of sensors supported. This app can’t show you something, that is not provided by your car. Attention "bad" adapters! We faced the problem, that some adapters (often cheep Chinese clones), can’t connect to the smartphone or the car. Some of them can even make your car engine work unstable, often lost connection, increase time lag when reading data. So, we recommend you to use genuine ELM327 or recommended adapter brands. Car Scanner ELM OBD2 is free but to unlock all the features, a one-time purchase or a subscription is required. Under no circumstances will the developer of this application be held responsible for incidents resulting from the use and/or interpretation of the data in the application. If you have any issues, you can always contact developer using Settings - Contact developer in the app or just send email to wp_soft@outlook.com Car Scanner ELM OBD2 for iOS Terms of use can be found at https://www.carscanner.info/ios-tos/

What is supported The app can enable/disable the password protection of the LeLink OBDII adapter manufactured after 2021. When the protection is enabled, user will be asked to enter pairing password to use LeLink's OBDII functions. How to use You can only configure LeLink within 4 minutes after it powers on. Please unplug and replug to power-cycle the LeLink if it has been on for more than 4 minutes. The app will scan and display a list of the LeLink devices. Click the item to configure. The app does not need the pairing password. If you are asked to enter password, you may choose cancel to skip. Please record the pairing password if you enable password protection. Without correct password the LeLink will not perform OBDII functions. After enable/disable the password protection, you should power-cycle the LeLink to make the change effective. If you need help Online FAQ page at http://www.outdoor-apps.com/enginelink.html Send us email at support@ksolution.org