Barometer & Altimeter & Thermo vs BenchKit

Barometer and Altimeter is a simple application for measuring atmospheric pressure and altitude. The application uses: - built-in GPS, - built-in pressure sensor / barometer (if the device does not have a barometric sensor, application retrieves atmospheric pressure data via the Internet from the nearest meteorological station), - automatic altitude and atmospheric pressure calibration algorithm, based on data from local meteorological stations. Barometer and Altimeter features: - accurate height measurement above sea level (from GPS and other sensors), - accurate measurement of barometric pressure (if the device is equipped in pressure sensor and check data available online) - GPS coordinates, name of location, country - information and current weather data from your local weather station (if available). - outside temperature, - wind speed, - visibility, - humidity, hygrometer (if device is equipped with appropriate sensors). Exemplary uses of a barometer or altimeter tracker: - health and medical - by monitoring the atmosferic pressure, you can be prepared for pressure jumps, headaches, migraine and malaise, - for fishermen and anglers who fishing and sailing - monitoring the atmospheric pressure and weather you can increase the chances for good fishing, - sportsmen and tourists, - for determining, predicting and checking weather, air temperature, wind speed, - to check the location, - for pilots for check pressure and altitude, - sailors, seamans and surfers can check the wind. Using this barometer tracker is simpler than using an aneroid or mercury barometer. Our Barometer and Altimeter tracker is easy to use, simple and handy. Warning! Some portable devices (tablets, phones, smartphones) do not have a built-in pressure sensor. On these devices, the measurements may be less accurate as they will be based on data from the local meteorological stations. We are constantly developing this app, if you see something that can be improved send us on help@examobile.pl. If you like this app, rate it for 5 stars. Enjoy and have a good time with this app!

BenchKit puts four everyday electronics calculations in one focused, offline iPhone app. RESISTOR CODES Decode 3, 4, 5, and 6-band axial resistors by tapping the bands on a drawn resistor, or SMD codes (3-digit, 4-digit, EIA-96, R notation). See the tolerance range, IEC marking code, and standard E-series match, with a warning when a reading is probably reversed. PCB TRACE WIDTH Estimate minimum internal or external copper trace width from current, copper weight, and allowed temperature rise, in millimeters and mils, or the current a given width can carry. Results outside the IPC-2221 chart range are flagged as extrapolations. VOLTAGE DROP Voltage drop, voltage at the load, power lost in the wiring, and the share of supply that reaches the load. Enter the round-trip resistance, or wire gauge (AWG or mm²), length, and conductor temperature. VOLTAGE DIVIDER Ideal unloaded output voltage, divider current, per-resistor dissipation, output resistance, and what an optional load does to the output. Or enter a target voltage and get the closest E24/E96 resistor pairs with their worst-case output. Type values the way engineers write them: 4k7, 2R2, 100m, 3V3; the keyboard has keys for the letters. No account. No ads. No analytics. No network connection. English, Simplified Chinese, and Japanese. BenchKit is a quick estimation tool. Always verify production designs against component datasheets, applicable standards, simulation, and physical validation.