soundfruuze vs VintageRack

'soundfruuze' is an exprerimental live sampler / looper / granular and FFT scrub effect It records live the recent 10 seconds of audio and allows you to manipulate it with special controls. The interface is divided into five “lanes”, sound is produced by touching the lanes. Each lane can be set up to use different effect and has various control parameters mapped to the touch position: Scratch Most basic lane type. You can control the volume of the resulting sound and smoothness of the position interpolation. Lesser smooth value produces the sound with more high frequencies. Speed Another basic playback type. Starts playing from the position in the sound that you selected with touch. Vertical position controls playback speed, horizontal parameter is assignable. Granular Freeze Allows you to select the sound at some position and use both horizontal and vertical coordinates of touch as 2 independent parameters. You can control volume, playback speed (pitch) and the grain size. Granular Scrub This type of lane is very similar to granular freeze but it allows to change the position of the grain after its start. Granular Stream This lane type enables granular playback with random parameters. You can randomise grain position in the selected range, speed, grain size and pan. There is special control for that type lane. The 2-dimensional slider is assignable so you can change 2 parameters for each touch independently. FFT Freeze and FFT Scrub In both FFT types of lanes another algorithm is used to process sound. In both FFT Freeze and Scrub sound is analyzed with the FFT transform and divided into frames. FFT Freeze allows you to select the frame at the desired sample position and to play it making the sound “freeze” at this point. Looper This lane type allows you to make loops / repeat large grains of sound. When you touch a looper lane, a new looper control is created and is kept there until you turn it off with the red ‘close’ button. You can change loop speed, volume, size and position for each loop individually or for all loops on one lane together using additional controls FFT Looper This type works the same way as basic Looper but allows to change playback speed while keeping the pitch. It uses FFT algorithm for playback allowing constant pitch for any playback speed and the same FFT effects (gate and phase randomisation) Each lane has also five effects: - Frequency shifter - Ring modulation - Sample-and-hold (" lo-fi") - HP/LP filter - Reverb

VintageRack is a minimalistic and convenient multi-effect application that contains modules realistically modeling notable retro gear from the early digital era with their inherent aesthetics and atmosphere. Most of the effects in this application have been inspired and based on the principles of actual hardware from the 70s and 80s, which is great for giving the sound of any instrument the nostalgic and emotional mood of old recordings. This application has a clean and intuitive user interface with a well-considered structure. The signal path is split into seven slots: the first for input control, the last for output, and five customizable effect modules in between. Each module features a master fader for adjusting effect presence and a mute button for smooth toggling. These parameters can be easily assigned to MIDI controls right from the main screen, improving both workflow and productivity. Smooth transitions between presets and on-screen pads for quickly switching presets that can be easily assigned to MIDI controls allow flexible effect selection during live performances or studio recordings. Another great feature of VintageRack is the ability to set a lower bit depth of processed signal, typical for early digital devices, both for the entire path and for individual modules. As with these devices, this application models pre- and post-processing of the analog signal both before and after the digital circuits with the addition of companders, emphasis and filters, which makes the sound similar to the real devices. Effect modules: - Analog modeled compressor. - Three band equalizer typical for mixing consoles. - Classic and reverse delays with modulation feature. - Two Chorus modules are precise emulations of known devices. - Two modules of Flanger with different options and tones. - Two modules of Phaser with various sound character. - Filter module controlled by LFO or envelope generator. - Faithful emulation of classic Wah effects with added automation. - Combined effect of Tremolo and Vibrato with separate rate. - Ring modulator with additional modulation of carrier. - Three types of Fuzz with modulated filters. - Emulation of one of the early digital reverbs. - Vintage exciter with bass enhancer. - Spring reverb with tube preamp. - Advanced formant filter with voice synth mode. - Input slot contains Noise gate and Automatic gain control. - Output slot contains tape-style saturation and three types of tonestacks. VintageRack is a universal application for iOS and macOS. It can work on iPhone and iPad as well as Mac / MacBook with M1 chip (and later). VintageRack works on iPhone and iPad standalone, as an Audio Unit or Inter-App Audio module, and supports Audiobus and Ableton Link. On MacOS, VintageRack can works both as a standalone application and as an Audio unit (AUv3) with DAWs and other hosts that support AUv3 plugins. All application features are available on iOS and macOS, including MIDI support (with a MIDI learn option) and audio unit parameters. VintageRack has a built-in detailed description of all parameters also available as PDF file on the application site. Demo: https://youtu.be/I3lcd5rYaBQ https://youtu.be/zmHjpFDkPLQ https://youtu.be/eqkvhDBUGPQ https://youtu.be/o79g6S5qftk You can find more information on VintageRack and other creative audio apps at: https://motion-soundscape.blogspot.com