Mosquitone Detector vs MorrowStep Barcode Alarm Clock

"Mosquitone Detector" is a sound measurement app that detects high frequency noises and ultrasonic sounds hard to hear for human ears. The human audible range is generally said to be 20 Hz to 20 kHz, but sounds above 10kHz gradually become harder to hear with age. On the other hand, prolonged exposure to noise at excessively high sound pressure levels has been pointed out as potentially harmful to health, including hearing. You may be unknowingly exposed to artificially generated dangerous high-frequency noise. This app can detect and visualize such noises. For example, there are increasing cases where high frequency noise generators are installed in various places as a purpose of repelling young people and beast pests using very high frequency mosquito noises, which are inaudible to general adults. Young children, in particular, may be exposed to very loud noise in an uncomfortable environment because adults cannot recognize it. Use this app to find high frequency noise and quickly get away from the bad spot or remove the noise source. Two operating modes are available in this app, Detection Mode and Search Mode. Detection Mode can detect if there are high frequency noises and ultrasonic sounds. Search Mode can pinpoint the direction of high frequency sound sources. Features: - Detection of high frequency sound and ultrasonic wave, display of the peak frequency of the highest level. - Search for sound source direction: 360 degrees horizontally - Detectable frequency range: 8 kHz - 16 kHz / 16 kHz - 23 kHz (2 band division) - Function to switch the gain range: 0dB - 100dB / -10dB - 90dB / -20dB - 80dB (in Detection Mode) - Measurement screen rotation function (Rotate) Operating procedure: 1) Selection of detectable frequency band Select the frequency band as more than 16kHz or less than 16kHz. 2) Selection of Operational mode - Detection Mode (Detect) It finds an inaudible high frequency and ultrasonic sound in the frequency band more than 16 kHz (or less than 16 kHz). Tap START button and it starts the detection function. If high frequency or ultrasonic sound exist, it will be displayed on the graph as the peak frequency. You can make the graph display easier to see by switching the gain range. - Search Mode (Search) It finds the direction of occurrence of the high-frequency sound source that detected the peak frequency. Search mode can be used only when high frequency or ultrasonic sound is founded in Detect mode. Please make sure to hold the bottom built-in microphone of iPhone so that it faces outward. If you measure with the microphone facing inward, microphone sensitivity will deteriorate, and accurate measurement will not be possible. Tap Start button, and firmly hold the iPhone terminal, please turn slowly clockwise. Recommended that the time required for a rotation is about 15 seconds and the rotation speed in the graph is approximately 4 rpm. The measurement is completed by one revolution, and the signal strength of the peak frequency is displayed on the pie chart. You can find approximate direction of the high-frequency sound source relative to your standing position. 3) Snapshot Measurement results can be saved as image files in “Photos,” and a timestamp is embedded in the image. Note: If the frequency changes periodically or randomly, it is not possible to determine the direction of occurrence in "Search". Ultrasonic measurement depends on the sensitivity characteristics of the built-in microphone, so the measurement result may vary. Peak frequency measurements (dB) conform to general noise levels. Remarks: It is still under study about health effects on human body by listening to high frequencies including ultrasonic sound. If the high frequency noise of high level is detected daily, we recommend that you consult an expert. Please visit our iOS App Support page for more information on this app.

Alarm off. Still in bed? Give your morning a destination. MorrowStep is a barcode alarm that pairs your wake-up with an everyday item you keep away from bed, like toothpaste or coffee. When your alarm rings, go to that item and scan its matching saved barcode or QR code to finish your wake-up. Emergency Stop is available if you can't scan. RECOGNIZE YOUR DESTINATION Save barcodes and QR codes with names and reference photos, so the right object is easy to recognize. Reuse your saved codes, choose a default or assign a different barcode to each alarm. PLAN YOUR MORNINGS Set a one-time alarm or repeat it on selected days. Use Quick alarms for 20 minutes, 30 minutes, 8 hours or a custom duration. Put alarms in your preferred order and see your next alarm and the time remaining on Today. MAKE IT FAMILIAR Choose from 13 sounds across Classic Alarm, Rhythmic and Gentle. Pick Clear Sky, Lilac Dawn or Paper & Ink, with matching app icons. Use Light or Dark appearance, or follow your iPhone. English and Georgian interfaces are available; sound names stay in English. KEEP YOUR SETUP No MorrowStep account is required, and barcode scanning happens on your iPhone. Optional private iCloud backups keep saved barcodes, reference photos, alarm settings and app language. The latest 10 successful backups are kept. Choose one to restore; restored alarms start Off. WHEN YOU CAN'T SCAN Emergency Stop finishes the wake-up without scanning: type STOP ALARM, then hold the button for five continuous seconds. Releasing early or interrupting the hold cancels it. Tapping Stop on the system alarm alert does not finish the wake-up, so another alert can follow. TRY IT FREE The seven-day trial starts with your original App Store download. Reinstalling does not restart it, and no paid subscription starts automatically. After the trial, choose Monthly, Yearly or Lifetime to keep creating, changing and turning on alarms. During the trial, creating, changing or turning on alarms requires internet. Alarms you have already set can still be finished offline, even after the trial ends. Monthly and Yearly renew automatically until canceled in your App Store subscription settings. Lifetime is a one-time purchase and does not cancel an existing Monthly or Yearly subscription; cancel that subscription yourself if you switch. Purchases are charged when confirmed, with current prices shown in the app. Active Monthly, Yearly or Lifetime access removes the trial's internet requirement. Purchases and restores may need internet. Requires iPhone with iOS 26.1 or later. Support: support.morrowstep@gmail.com Privacy Policy: https://gss.ge/home/privacypolicy/morrowstep Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/