SMART Keypad vs Remote PLC

This app allows the diagnosis and parameterization of a Lenze i500 inverter. A WLAN module on the i500 inverter is required for communication. Supported views and functions: • Connect Device search, Direct connection via IP address, Simulation, GDC file • Diagnosis Dashboard, logbook, fieldbus, digital and analog inputs/outputs, process controller, device information • Basic commissioning via wizard • Parameter list Menu-guided overview of all device parameters • Transfer Up-/Download and e-mailing of parameter sets • Manual control Setpoint setting, start-stop function and reversal of direction of rotation • Optical tracking • Display of the current Wi-Fi network • Search for parameters • Set parameter values • Save the parameter set • Reset the error • Release controller • Inhibit controller • Reset device (PIN, parameter set and logbook) • Automatic and manual updating of device descriptions • Log in/out • Contact to support (mail and telephone)

Remote PLC is an application for real time monitoring and control for the CLICK and CLICK PLUS Programmable Control product lines offered by Automationdirect.com. For this app to function as designed, a CLICK PLC with ethernet or Bluetooth support is required. The Remote PLC app offers a quick method of connecting to a PLC to view and edit values in the PLC registers, as well as check the PLC project information, including the Error logs. Main Features: -Multiple Level User Accounts. Once connected, the authorized users can view and edit Monitor Windows based on their permission levels setup in the project file. -Custom Monitor windows can be created and stored to the PLC using the CLICK Programming software version 3.60 or later. Monitor Window access can be based on the user permissions. - Monitor and edit designated discrete and integer values within the PLC. Timer / Counter values can easily be viewed and edited. - PLC type and status, such as PLC Error Logs, scan times (Min and Max), as well as Project file information. Requirements: • All current CLICK and CLICK PLUS PLCs with ethernet/Bluetooth support the Remote PLC app. • The PLC must be using firmware Version 3.60 or later. • CLICK Programming Software Version 3.60 or later is required to program and configure the PLC to support the Remote PLC App. • The CPU must have compatible network settings with the device running the Remote PLC App.