PRO type vs FlySpark
Price, ratings, monetisation and update history for both apps, side by side ā with what reviewers say about each.
PRO type
Read full descriptionHide full description
This App use only PRO-MODE. PRO MODE, it is necessary to set the ignition data or dwell data correctly. Engine or not rise blown or not idling. Sample data will not have been served from our Company, please use only those who correctly understand the ignition data or dwell data. This app edit fuel mapping and spark angle setting (PRO mode) which the Fuel Injection / Spark Angle piggyback controller DILTS JAPAN's ENIGMA FirePlus type-V. This App can control only ENIGMA FirePlus type-V. Since conventional applications ENIGMA, Enigma LC, Enigma Fireplus, Enigma type-V and Semi-Full each have its own App, please use it. This APP responds by buying bike model to all models of ENIGMA FirePlus type-V. Although this App can be downloaded for free, only the screen of the tachometer is displayed free of charge. It is necessary to purchase bike model that conforms to the model of the motorcycles. Please app in purchase bike model according to the type of motorcycle of ENIGMA FirePlus type-V which you own. Purchase bike model in the App and connect with ENIGMA FirePlus type-V with Bluetooth LE. Then you can control the following ENIGMA FirePlus type-V functions. On your purchase, if you connect a BluetoothLE ENIGMA FirePlus type-V Bluetooth model, Other operations of the following ENIGMA FirePlus type-V body, I can in a variety of iOS devices. This app need Bluetooth LE.After iphone4s ipad 3rd. This app can edit PRO spark mode(spark setting edit) only.Use to EASY mode(spark adjust edit) must buy another app. - Spark angle setting 0-70 degrees. and dwell time setting. - Two revlimitter setting function,normal revlimit and pitrane limitter. - ENIGMA FirePlus type-V have new O2 feed back canceller.It is possible to achieve the desired flame throughout the whole area. - cancel / set the engine speed limiter. - The maximum 4000micro/-7500(ex.GROM JC75)micro seconds the engine rotation and throttle position for each fuel injection increase / decrease can edit and write-read. - displayed in 3D graph increase or decrease the amount of fuel. - view the throttle opening ,tachometer and oil temperature monitor in real time. - The fuel map, showing real-time engine speed, throttle position of the current. - arbitrarily set the rev limit. - the digital acceleration pump. - corrected for the actual Throttle position sensor. - save and create multiple fuel data, you can swap immediately when needed. - English,Japanese localize. Pairing is not required. Do not search Enigma in the Bluetooth settings screen. After the Bluetooth to ON in the Bluetooth settings screen to exit the setting screen in the home button, start the app, please do the connection from the "Connect to ENIGMA" app. There is no direct linkage function of the map data and the PC version and other smartphones. Please migrate the map data via the Enigma.
FlySpark
Read full descriptionHide full description
FlySpark turns your iPhone or iPad into a complete FPV drone workshop. Connect to your flight controller over Bluetooth LE or Wi-Fi and configure and tune your quadcopter right at the field. No laptop needed. One app for your whole setup: works with Betaflight, INAV, ArduPilot and PX4 flight controllers, ExpressLRS radio links and BLHeli_S, Bluejay and AM32 ESCs. Built for touch, with phone and tablet layouts. BETAFLIGHT AND INAV CONFIGURATOR ⢠Every tab: ports, configuration, power and battery, failsafe, receiver, modes, motors, servos, sensors, GPS, OSD, VTX, LED strip, blackbox, presets and CLI ⢠Live 3D model of your craft, accelerometer and compass calibration ⢠Motor test plus motor order and spin direction wizards ⢠Drag-and-drop OSD editor with a live preview ⢠INAV missions, geozones, safe homes and programming tab ⢠CLI backup and restore, profiles and presets PID TUNING ⢠Tuning sliders, PID gains, rates and filters with live rate curves ⢠Autotune suggestions from your own blackbox logs ⢠Named PID and rate profiles you can copy between slots ARDUPILOT AND PX4 GROUND STATION ⢠Mission planner with 62 mission commands, survey grids, fences and rally points on street or satellite maps ⢠HUD, flight modes, arming, parameters and messages ⢠Setup and calibration: accelerometer, compass, radio, airframe and flight modes EXPRESSLRS ⢠Binding phrase, model match and firmware updates over the receiver or TX module Wi-Fi ⢠Runtime options, output power and backpack settings over Wi-Fi ESC CONFIGURATOR ⢠Read and change BLHeli_S, Bluejay and AM32 settings through your flight controller BLACKBOX EXPLORER ⢠Gyro, setpoint, PID and motor graphs on a zoomable timeline ⢠Noise spectrum and throttle heatmap for filter tuning ⢠GPS track map, CSV export and DVR video sync PREFLIGHT FORECAST ⢠Go / no-go status from wind, gusts, rain, visibility and temperature ⢠Kp index and visible GPS satellites ⢠Nearby no-fly zones, airports and restricted areas on a map ALSO INCLUDED ⢠Battery profiles for your packs ⢠Demo mode for every tool: explore everything on simulated hardware, no drone needed ⢠9 languages: English, Hindi, Spanish, Portuguese, German, French, Russian, Chinese and Japanese ⢠Light and dark themes ⢠No account, no ads WORKS WITH ⢠Flight controllers running Betaflight, INAV, ArduPilot or PX4 ⢠ExpressLRS 2.4 GHz and 900 MHz receivers and TX modules ⢠BLHeli_S, Bluejay and AM32 ESCs ⢠Bluetooth LE adapters (Nordic UART, HM-10) and Wi-Fi bridges (TCP or UDP) FAQ Do I need a computer? No. Configuration, PID tuning and mission planning all run on your iPhone or iPad. How do I connect? Over Bluetooth LE, using a BLE adapter on your flight controller or a board with built-in Bluetooth, or over Wi-Fi through a TCP or UDP bridge. Can I try it without a drone? Yes. Open Tools and tap Try the demo. Do you collect my data? Diagnostics and usage statistics are sent only if you allow them, and you can turn them off at any time in Settings. FlySpark is an independent app and is not affiliated with or endorsed by the Betaflight, INAV, ArduPilot, PX4 or ExpressLRS projects. Their names are used only to describe compatibility. Map data © OpenStreetMap contributors. Weather data by Open-Meteo.com. Questions or ideas? Write to support@flyspark.in
Screenshots
Verdict
The clearest difference is in-app purchases: FlySpark at none against PRO type's 5. PRO type's advantage is iOS requirement (9.0 vs 15.0). On price, ads and device support there is nothing between them.
Scored on Price Ā· Rating Ā· Positive reviews Ā· Number of ratings Ā· Update frequency Ā· Ads Ā· In-app purchases Ā· Monetization Ā· Best chart rank Ā· Devices Ā· Requires iOS
Both are free to download. PRO type sells 5 one-off in-app purchases. FlySpark asks for nothing beyond the download.
| Parameter | PRO type | FlySpark |
|---|---|---|
| Price | Free | Free |
| Update frequency | Every 9 months | ā |
| Ads | No | No |
| In-app purchases | Yes | No ā better |
| Devices | iPhone, iPad, iPod | iPhone, iPad, iPod |
| Requires iOS | 9.0 ā better | 15.0 |
| Further details ā not scored | ||
| Size | 4 MB | 85 MB |
| Age rating | 4+ | 4+ |
| Developer | DILTS JAPAN, LIMITED LIABILITY CO. | suraj bhati |
In-app purchases
PRO type
- GROM JC75$3.99
- CYGNUS-X SED8J$3.99
- CYGNUS-X SEA5J$3.99
Show 2 moreShow fewer
- GROM JC61$3.99
- GSX-R125 DL33B/S125 DL32B$3.99
FlySpark
No in-app purchases
Questions
Is PRO type free?
Is FlySpark free?
Do PRO type or FlySpark have ads?
Other comparisons















