Discord4 vs BLEASS Slow Machine

Discord4 is the Audio Damage stereo pitch shifter, in its fourth generation. Each channel has its own pitch shifter, delay, bandpass filter, and feedback, and every repeat runs back through the shifter, so the same effect can double a vocal, stack fifths into an arpeggio, or send echoes spiraling up or down. Three engines set the character. Vintage is modeled on the H910 and H949 and has their grainy, glitchy character. Modern is cleaner and more transparent. Both have a buffer control from 32 to 2048 samples that changes the character of the shift. Granular cuts the signal into grains from 15 to 100 ms long, with an interval control and a Chaos knob that scrambles them, for anything from soft clouds to complete destruction. Detune the two sides a few cents in opposite directions over a short delay for a wide doubler. Set one side a fifth up, sync the delays, and raise the feedback so each repeat climbs another step. Keep the reverb in the loop for shimmer, then hit Freeze to hold a pad under the part. Turn on MIDI Shift to play harmonies from a keyboard, or ride the pitch wheel for bends. • Three pitch-shift engines: Vintage, Modern, and Granular • True stereo: each side has its own shifter, delay, filter, feedback, and pan, or link them so the right follows the left • Up to three octaves up or down, set by the cent or locked to semitones • Delays up to two seconds per side, free-running or tempo-synced, with feedback and cross-feedback • A bandpass filter in each feedback path, set from an XY pad • A stereo reverb inside the loop, with Freeze to hold the tail indefinitely • Saturation in the loop to keep runaway feedback in check • Two flexible LFOs for pitch, delay time, and filter frequency, shaped by Wave, Skew, and Warp, free from 0.01 to 14 Hz or synced to tempo • MIDI Shift: play the shift amount from a keyboard, with pitch bend, in hosts that send MIDI to effects • A preset browser with folders and favorites, and 50 factory presets from everyday doubling to the thoroughly strange Discord4 runs as an AUv3 plugin inside any compatible iOS host, including AUM, Cubasis, Drambo, and apeMatrix, and as a standalone app with background audio for live input. It is also available for macOS, Windows, and Linux as a desktop plugin. Requires iOS 16 or later. An AUv3 host app is recommended. No subscriptions. No accounts. No nonsense. Buy it once, own it forever.

Thanks to 3 different yet complementary ways of manipulating time with creativity, BLEASS Slow Machine can deepen any beat by completely or partially slowing down the audio signal, transform epic leads into heavy basses, and add some “tape stop” effect with precision either by touching the X/Y Stop trigger, or by dialing in precise sequence automations. TECHNICAL DESCRIPTION: BLEASS Slow Machine offers both sequenced and live ways to manipulate time thanks to 3 stages: ____ SLOW DOWN stage: Creative and straightforward slow down effect that modulates both rhythm and pitch. - Loop Size: Slow Down resets its reading position according to the Loop Size. A Loop Size of ‘1 bar’ means that the reading position is resynced with the host reading position every 1 bar. - Speed: controls the speed of the played loop relative to the default speed. (For example ‘½’ means that audio is played back at half its original speed, which means one octave lower). - Quantization: When this option is ON, every change in Loop Size and in Speed will wait until the end of the current loop to be effective. When it is set to OFF, the change is immediate. - Filter: keep a selected frequency band of the slowed signal. When the filter is ON, the middle colored band is processed by the effect while the low and high bands remain unchanged. - Fade: Sets the duration of the crossfade between loops. - State: Activates or deactivates the SLOW DOWN stage - Dry/Wet: mixes the dry and wet signals ____ TIME STOP stage: Especially made for performance, TIME STOP gives an intuitive and visual way to instantly create a classic tape stop effect. - Trigger: the “Stop” button triggers the time stop effect within a given duration (set by the position of your finger along the Y-axis) and following a curve (set by the position of your finger along the X-axis). - Mode: choose between 4 time stop modes: ‘Step’, ‘Ramp Up & Down, ‘Ramp Down’ and ‘Ramp Up’. _ In ‘Step’ mode, the speed instantly goes to 0 when the trigger is hit and goes back to 1 when the trigger is released. _ In ‘Ramp Up & Down’ mode the speed is ramped down to 0 when the trigger is hit and ramped up to 1 when it is released. The duration and curve of the ramp is set by the position of your finger on the control. _ In ‘Ramp Down’ mode, the speed is ramped down to 0 when the trigger is hit and instantly goes back to 1 when released. _ In ‘Ramp Up’ mode the speed instantly goes to 0 when the trigger is hit and is ramped up to 1 when released. - Hold: when Hold is ON, the trigger is not released until Hold is turned OFF. - Speed: precise control of the play speed. - State: Activates or deactivates the TIME STOP stage - Dry/Wet: mixes the dry and wet audio signals ____ SPEED SEQUENCER stage: The speed sequencer stage offers a unique way to program speed variations in your music. - Length: sets the number of steps in the sequencer. - Resolution: sets the duration of a sequencer step. - Grid Snap: when ON, steps snap to the grid allowing a precise rhythmic and harmonic editing. - Sequencer: sets a playing speed per step. Each step has 4 different curve modes: ‘Step’, ‘Link’, ‘Ramp Up’ and ‘Ramp Down’. Change the curve mode by tapping the curve icon at the bottom of each step. - Amount: controls the amount of sequencer speed modulation. 100% means that speed can go from 1 to 0 (50% means that speed can go from 1 to 0.5). - Randomness: sets the amount of randomness of the sequencer. If randomness is 50%, a step value will be a random value between stepValue +/- 0.5 - Fade: controls the crossfade duration between each step. - State: Activates or deactivates the Speed Sequencer stage - Dry/Wet: mixes the proportion of dry and wet signals Check out www.bleass.com for video tutorials and more info! * PLEASE NOTE: this is an Audio Unit Effect plugin (AUv3) which requires a compatible host such as AUM, GarageBand, Cubasis, BM3 or Auria. Standalone mode also available for demo purposes.