rtl_tcp SDR vs MyMixTool

An RTL-SDR Software Defined Radio receiver app for iOS devices.  Listen to AM, FM, SSB and CW radio signals. View an RF spectrum and waterfall. Connect, via the rtl_tcp network protocol, to networked RTL-SDR USB peripherals. This app requires an external rtl_tcp server. iOS devices do not currently support the direct connection of USB peripherals such as an RTL-SDR. Thus, the use of this app requires network access to a server, such as a Raspberry Pi (or Mac), with an RTL-SDR unit plugged into its USB port, and running the rtl_tcp protocol at an TCP/IP network address accessible from your iOS device. This allows a Raspberry Pi (or Mac) to act, essentially, as the USB port adapter for your iOS device. The rtl_tcp SDR app can also connect to hfp_tcp for the Airspy HF+, rsp_tcp for SDRPlay devices, and lmm_tcp for the LimeSDR Mini; see GitHub for server source code. This app can also connect to a Hermes Lite 2 QRP transceiver directly, if it has a known IP address, or through an hl2_tcp server. No support is provided for installing any of the rtl_tcp or other tcp software needed to use this app (with a Raspberry Pi, or otherwise). Please do not download this app unless you are already familiar with Software Defined Radio, have an RTL-SDR or equivalent USB SDR peripheral, and have already installed and tested rtl_tcp on your Raspberry Pi, Mac, or other server. Note that this app requires a very high bandwidth network connection in order to receive streams of real-time RF samples from an RTL-SDR. It is recommended that your rtl_tcp server be on a wired connection rather than on the same WiFi as your iOS device.

The best way to control digital mixer with your iPhone or iPad! Features: • Different views (general view, layer view, edit mode, aux sends, fx sends, player mode) • Easy assign volumes, reverbs, delays, FX effects, balances, mute, solo • Control built-in USB media player • Quick and easy graphic EQ, compressor and gate • Easily assign mute groups • Easily assign sub groups • Ability to protect controlling with a master password (Local aux control) • Import/export presets and shows • Runs on smartphones and tablets • Email support Warning: This app does not play any sound; you can't even edit any sounds. It is solely for remote controlling your digital mixer. The following models are supported: • Soundcraft Ui12 • Soundcraft Ui16 • Soundcraft Ui24r ## DISCLAIMER This product and/or service is not affiliated with, endorsed by or in any way associated with Soundcraft or its products and services. Soundcraft and their respective logos are trademarks or registered trademarks of Harman International Industries, Inc.