Comparison

rtl_tcp SDR vs Packet Commander

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

rtl_tcp SDR

This app acts as a software-defined radio receiver for iOS devices, allowing you to listen to various radio signals and view RF spectrum data. It connects to external SDR peripherals via a network protocol, requiring a separate server setup.

Highlights
  • Listen to AM, FM, SSB, CW signals
  • View RF spectrum and waterfall
  • Connect to networked RTL-SDR peripherals
  • Supports Airspy HF+, SDRPlay, LimeSDR Mini
  • Direct connection to Hermes Lite 2
Features
Read full description

An RTL-SDR Software Defined Radio receiver app for iOS devices.  Listen to AM, FM, SSB and CW radio signals. View an RF spectrum and waterfall. Connect, via the rtl_tcp network protocol, to networked RTL-SDR USB peripherals. This app requires an external rtl_tcp server. iOS devices do not currently support the direct connection of USB peripherals such as an RTL-SDR. Thus, the use of this app requires network access to a server, such as a Raspberry Pi (or Mac), with an RTL-SDR unit plugged into its USB port, and running the rtl_tcp protocol at an TCP/IP network address accessible from your iOS device. This allows a Raspberry Pi (or Mac) to act, essentially, as the USB port adapter for your iOS device. The rtl_tcp SDR app can also connect to hfp_tcp for the Airspy HF+, rsp_tcp for SDRPlay devices, and lmm_tcp for the LimeSDR Mini; see GitHub for server source code. This app can also connect to a Hermes Lite 2 QRP transceiver directly, if it has a known IP address, or through an hl2_tcp server. No support is provided for installing any of the rtl_tcp or other tcp software needed to use this app (with a Raspberry Pi, or otherwise). Please do not download this app unless you are already familiar with Software Defined Radio, have an RTL-SDR or equivalent USB SDR peripheral, and have already installed and tested rtl_tcp on your Raspberry Pi, Mac, or other server. Note that this app requires a very high bandwidth network connection in order to receive streams of real-time RF samples from an RTL-SDR. It is recommended that your rtl_tcp server be on a wired connection rather than on the same WiFi as your iOS device.

About

Packet Commander

This app provides a classic terminal experience for packet radio communication on mobile devices. It offers powerful terminal features, smart connection management, and real-time over-the-air traffic monitoring. It's designed for amateur radio operators to connect with nodes, BBS, and decode traffic.

Highlights
  • Full-screen terminal for packet nodes and BBS
  • Classic color themes and adjustable layout
  • YAPP protocol support for file transfers
  • Location-aware digipeater routing
  • Seamless iCloud sync
  • Over-the-air traffic decoding
  • Auto-discovery of TNCs
Read full description

Packet Commander brings a classic terminal experience for packet radio to your iPhone or iPad. Try it free. The download includes 5 full connection sessions so you can explore the features and confirm compatibility before purchasing. After that, a purchase is required to continue connecting. Note: An amateur radio license is required to operate on the air. Powerful Terminal • Full-screen terminal for interacting with packet nodes and BBS over amateur radio • Classic color themes inspired by iconic computers • Adjustable fonts and layout for readability and screen efficiency • YAPP protocol support for file transfers • Dictation-ready for composing messages hands-free • Smart filename selection — double tap to highlight and copy Smarter Packet Connections • Location-aware digipeater routing: automatically recalls the last-used path at each location • Seamless iCloud sync for nodes and digipeaters across all your devices • Compatible with popular packet node software including BPQ32, URONode, and others Over-the-Air Monitor Connect to your radio and decode over-the-air traffic in real time. AX.25 frames are decoded and presented in an easy-to-read format. • Filter traffic to display exactly what you’re looking for • Search by address or content • Export the log to a file for later analysis Works with the Gear You Love • Auto-discovery of Bluetooth and TCP TNCs, including Dire Wolf on DigiPi • Automatic frequency set/restore on supported radios • Built-in, high-performance 1200 baud AFSK software modem • Optimized for VHF/UHF packet at both 1200 and 9600 baud Compatible with the Following Radios and TNCs: Radios with Built-in TNCs (Auto-sets and restores frequency on those radios) · BTECH UV-PRO, UV-50PRO · VERO VR-N76, VR-N7600 · RADIODITY GA-5WB, DB50-B · Kenwood TH-D74*, TH-D75* · PicoAPRS V4 *Requires B.B. Link Bluetooth adapter Portable KISS TNCs · Mobilinkd TNC3, TNC4 · LiNK500 TNC · DigiPi · Dire Wolf Software TNC Audio Interfaces (Using built-in software modem) · Digirig Lite · Digirig VOX PTT Cable · AIOC (All-In-One Cable) Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

Screenshots

rtl_tcp SDR3 screens
Packet Commander4 screens

Verdict

The call

The clearest difference is review sentiment: Packet Commander at 100% against rtl_tcp SDR's 40%. Packet Commander also leads on price (Free vs $12.99) and rating (4.9 vs 3.9). rtl_tcp SDR's advantage is in-app purchases (none vs 2) and iOS requirement (16.6 vs 18.2). On ratings volume, update cadence, ads and device support there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Packet Commander is free to download; rtl_tcp SDR costs $12.99 up front. Packet Commander sells 2 in-app purchases, starting at $8.99 per year. rtl_tcp SDR asks for nothing beyond the download.

ReceptionRating · Positive reviews · Number of ratings

Packet Commander holds the better App Store score, 4.9 against 3.9. Both are backed by a comparable volume of ratings — 32 and 49 respectively. Written reviews point the same way: 40% of rtl_tcp SDR's written reviews are positive against 100% of Packet Commander's.

UpkeepUpdate frequency

rtl_tcp SDR ships an update every 4 months, Packet Commander every 2 months. The most recent releases landed on November 13, 2026 and November 12, 2026 respectively.

Scorecard6 real differences · 4 level
rtl_tcp SDR versus Packet Commander: the parameters behind the verdict, then further details
Parameterrtl_tcp SDRPacket Commander
Price$12.99Free — better
Rating3.9 (32 ratings)4.9 (49 ratings) — better
Positive reviews40.0% of reviews100.0% of reviews — better
Number of ratings3249 — better
Update frequencyEvery 4 monthsEvery 2 months — better
AdsNoNo
In-app purchasesNo — betterYes
MonetizationPaidFree with in-app purchases — better
DevicesiPhone, iPadiPhone, iPad
Requires iOS16.6 — better18.2
Further details — not scored
Size3 MB10 MB
Age rating4+4+
DeveloperHotPaw ProductionsIsland Magic Co.

Customer experience

rtl_tcp SDR

All ratings32 ratings
Positive68.8%
Neutral9.4%
Negative21.9%
Written reviews30 reviews
Positive40.0%
Neutral16.7%
Negative43.3%

Packet Commander

All ratings44 ratings
Positive100.0%
Neutral0.0%
Negative0.0%
Written reviews8 reviews
Positive100.0%
Neutral0.0%
Negative0.0%

In-app purchases

None

rtl_tcp SDR

No in-app purchases

2 purchases

Packet Commander

Subscriptions1
  • Yearly Subscription$8.991 Year
One-time1
  • One-Time Purchase$24.99

Questions

Is rtl_tcp SDR free?
rtl_tcp SDR costs $12.99, with no in-app purchases.
Is Packet Commander free?
Packet Commander is free to download, with in-app purchases available.
Which has better reviews, rtl_tcp SDR or Packet Commander?
Packet Commander is rated higher. rtl_tcp SDR averages 3.9 out of 5 from 32 ratings, while Packet Commander averages 4.9 from 49 ratings.
Do rtl_tcp SDR or Packet Commander have ads?
Neither rtl_tcp SDR nor Packet Commander shows ads.
Which is updated more often, rtl_tcp SDR or Packet Commander?
rtl_tcp SDR ships an update every 4 months, and Packet Commander every 2 months. Most recently, rtl_tcp SDR was updated on November 13, 2026 and Packet Commander on November 12, 2026.

Other comparisons