Bluetooth+ for Blackmagic vs TouchDirector Mini

-- NEW External Controllers -- Connect Tilta Nucleus Nano & Nucleus-M to control Focus, Iris and Zoom, as well as Start & Stop Recording. Zoom and Focus control supported on Pocket 4K only. This is part of the new Pro feature set, which also includes Multi-Cam mode. -- MULTI-CAM MODE -- Multi-Cam Mode is now part of the Pro feature set, and includes these fantastic features: • Control up to 12 Blackmagic cameras at once • Create up to 3 distinct Control Groups, to give you fine-grain control over different settings for different cameras • You can choose to have changes made on one camera automatically update all the other cameras in its Control Group, or control everything straight from Bluetooth+ • Give your cameras Nicknames to quick, easy control Multi-Cam gives you control over the following features synced across an entire Group: • Start/Stop Recording • White Balance + Tint • Project frame rate (off-speed frame rates not supported) • Shutter Angle/Speed • ISO • Overlays • Slate • Trigger Auto-focus You can still control all other settings on a camera-by-camera basis, including: • Trigger stills capture • Iris control • Focus + Zoom (on supported lenses) • Codec + Resolution • Playback control • You can also set ISO specifically, rather than by camera group And of course, everyone has access to all of these amazing features: • Follow Focus (limited support for EF Mount cameras). See below for more info • Zoom Control on supported lenses • Trigger Stills capture • Record Start/Stop • White Balance + Tint, including 5 helpful presets and Auto White Balance • Audio Controls • Trigger Autofocus (for supported electronic lenses with autofocus enabled on lens) • Off-speed frame rates • Aperture (for supported electronic lenses) • Shutter Angle • ISO • Auto-Exposure Control • Active Card • Power On/Off • Monitor Overlays • Codec & Resolution • Enter metadata in the Digital Slate (including location data from your iPhone or iPad if you give permission) • Control Lock - locks critical controls while recording, preventing accidental settings changes during takes -- Follow Focus -- You can now pull focus wirelessly right from your iPhone or iPad. There are some limitations outlined below. • Currently only fully supports Pocket 4K, but as of v1.4 we now have limited support for EF mount cameras - Pocket 6K, Ursa Mini Pro G1 & G2 • The camera does not supply the app with any information on the lenses current focus distance, so the app will not update in real time if you pull focus manually on the lens • Due to the nature of bluetooth, focus pulls may not be 100% smooth. It works well for nice slow pulls, but fast pulls my not feel entirely natural and organic. Unfortunately this is a limitation of the available technology. • On EF mount cameras, we can only offset focus from its current position, with no broader knowledge of where the lens is in its focus range. This means that focus marks are not possible. In addition, focus pulls on EF mount cameras can be quite jerky depending on the lens in use. -- Playback Control -- With Bluetooth+ you can control the playback of clips right from your iOS device. There are some notable limitations at this point. Currently you can: • Start playing a clip, either forwards or backwards • Navigate between clips, either forwards or backwards For now, you will not be able to: • Pause a clip that is already playing • Change the speed of a clip that is already playing • Control clip looping -- Zoom Control -- Control the zoom level on supported lenses. For the most part, this will only work on MFT lenses with electronic zoom. We are currently unaware of EF lenses that support this feature -- Slate-Only Mode -- As the name suggests, this feature locks the app into Slate-Only mode, without the ability to change critical camera settings or start/stop recording. This means you can let an assistant keep metadata up to date without the fear of interfering with important camera settings.

TouchDirector ATEM Panel app to control every ATEM switcher from ATEM Mini to the ATEM Constellation in broadcast panel style. In addition to PVW/PGM, macros and transition area, you can select one of the following sections: • Audio • HyperDeck playback control • Aux control (up to 4 with ATEM Mini Extreme ISO SDI) • M/E 1 Key and DSK sources control in broadcast panel style • ATEM internal media player control • SuperSource/DVEK with box animation, Control of up to 6 PiP boxes* in one composition • WorldTally system • Streaming/recording • All macros Macro driven animation of SuperSource boxes and also up to 2 DVE key boxes* with real-time generated macros. TouchDirector is generating, sending and executing animation macros in real-time. This revolutionary solution makes animation much smoother, for SuperSource and DVEK animation in progressive formats. *with ATEM Mini Extreme, number of PiP boxes depends on ATEM Mini switcher type More features: • Save your Multi PIP compositions to your iCloud or other cloud services or share it with other iOS devices • Load compositions instantly or use Quick Composition buttons to prepare your upcoming Multi PIP events, it's like having multiple SuperSources! • Zoom up and down every single box e.g., to bring a talk guest from a discussion into front and back to the composition. Simply switch on the “single box zoom button”, and every box tapped by your finger will expand or collapse again, with just a touch on the visualized Multi PIP tool in the app! • Send all PIP boxes out of the screen after preparing. Then bring only the background on air and all boxes with a quick composition button animated back to the screen - an amazing effect! • Easy streaming setup for ATEM Mini Pro/ISO/Extreme with TouchDirector App for iPad. Copy and paste your streaming data and start streaming instantly without complicated XML editing. • Monitor your stream quality with the "Streaming data rate monitor", which records the data rates every second. Export streaming protocol e.g. for your client as chart in PNG format. • Select sources for all aux out in a broadcast panel design with customizable buttons. • Select sources for all upstream keys and all DSK keys in a broadcast panel design with customizable buttons. • Macros, Audio control, PVW/PGM row, AUX control, worldwide Tally, Media Player control, HyperDeck control. • PGM/PVW row is visible and switchable all the time, you can also swap PGM/PVW row to switch more comfortably on the iPad. • Manage and start up to 100 ATEM macros arranged in 10 groups and up to Quick macro buttons in definable number of rows between PGM/PVW and key area. • See the audio levels live and adjust them while controlling other part of the ATEM. Audio setup popup for every channel with on/off, tie, volume and balance slider. • See all AUX sources in one view and set them in broadcast panel style. • Send tally to your remote camera people and connect to them with text chat (free: max. 4 participants). • Choose stills and clips in the ATEM integrated Media Player, tie clips with DSK or Transition (Media player 1 - 4). • Connect 1 or 2 HyperDecks (all models) and use it as fully automated integrated media player for pre-produced clips or key-animations (use fill and key output at the HyperDeck Mini for alpha channel clips). • Generate clip lists with mark in and out and set repeat for your clips stored on your HyperDeck and HyperDeck Mini. • Assign your HyperDeck inputs related to their physical inputs in the Deck Assignments, also for Key and Fill. • Control your Key and DSK pre multiplying in one view in the Key Assignment settings. • Assign your DVEK boxes to your desired upstream key in the Key Assignment settings. • Recording functionality, you are able to control the recording functionality of an ATEM Mini/Extreme with up to 2 connected SSDs. • Timecode functionality: TouchDirector can now set ATEM time code type and preset time code in the new recording area.