Veris Sensors vs BAPI BLE Scanner

The PX3 Series Differential Pressure / Air Velocity Transducer can be field configured for either pressure or velocity measurement for a wide variety of applications. In Pressure mode, building/room pressure, duct static pressure or differential pressure can be measured. In Velocity mode, air velocity can be measured for airflow monitoring applications. The PX3 Series is available in three different configurations: duct, panel or universal. Duct and panel versions have two field selectable pressure subranges: 0 to 1 in. WC/0 to 250 Pa or 0 to 10 in. WC/0 to 2,500 Pa. The universal model can be mounted remotely in a panel or directly on a duct with pressure subranges from 0 to 10 in. WC/0 to 2500 Pa. All PX3 Series sensors are available with or without an LCD display and have a IP65/NEMA 4 enclosure rating. The Veris Sensors app provides the ability to view the PX3 sensor and configure a variety of field-selectable parameters remotely from a smart device via Bluetooth® wireless technology. The app allows users to create and store commonly used parameters that will reduce commissioning time and provide assurance that all parameters are properly configured with no call backs. The app can also create a trend log while connected, providing critical data for troubleshooting purposes.

The BAPI BLE Scanner app provides a simple way to check if BAPI’s wireless sensors will work in your environment. The app automatically scans your environment for BLE devices and displays them with their RSSI value, giving you and indication of the signal strength in your environment. Using the BAPI BLE Scanner app and one of BAPI’s wireless sensors, you can test your environment to see if to see how reliably a wireless sensor system will perform. BAPI’s wireless system consists of sensors and gateways. Sensors will send readings to the gateway, the gateway can then send readings to our cloud monitoring system or to an HVAC system. You can use the BAPI BLE Scanner to perform a site verification in your environment. Contact BAPI to order one of our wireless sensors. Once you receive your sensor, power it on and place it at a location that you want to measure. Open the BAPI BLE Scanner app on your smart device and position yourself where you would like to place a gateway. You can adjust the settings to only see BAPI wireless devices. You can then look at the RSSI value to determine if the sensor will be able to communicate reliably with the gateway and adjust the gateway or sensor position as needed. You can then repeat this process for each point you want to measure. The BAPI BLE Scanner makes it easy to determine how many sensors and gateways you will need for your environment and where to place them. You can then be confident that your wireless system will be able to communicate reliably. Contact us to start the site verification process