BITZER Electronics ServiceTool vs LLS 4000

This is the App edition of the BEST SOFTWARE (BITZER Electronics Service Tool) for connecting to BITZER IQ products that support Bluetooth. Quickly configure the devices, monitor the operation and view the alarms including alarm help texts. Furthermore, the logs can be retrieved from the devices, visualized and uploaded to the myBITZERcloud for storage and sharing with other devices and peoples. Supported products: // IQ MODULE CM-RC-02 // IQ MODULE CM-RC-01 - Requires firmware version 2.5.246.00 or newer - For firmware update use the Windows version of BEST as it requires to connect via the BEST converter // IQ MODULE CM-SW-01 - Requires firmware version 2.8.82.00 or newer - For firmware update use the Windows version of BEST as it requires to connect via the BEST converter // CSV - Bluetooth is available by the CSV frequency inverters with the control board of the 2nd generation. This control board can be recognized by the STO input (orange connector) or the RJ12 socket for the BEST converter - Requires firmware version 1.92 or newer - For first configuration (change of refrigerant or configuring the compressor type in case of spare parts) use the Windows version of BEST as it requires to connect via the BEST converter. Also for firmware updates // ECOSTAR LHV5E and LHV7E - Requires firmware version 5.0.2.0 or newer - For firmware update use the Windows version of BEST

Connect to and setup of any Danfoss LLS 4000/4000U liquid level switch with the LLS 4000 app. Commissioning, setup, and monitoring can all be performed quickly and conveniently with just a few taps on your smartphone. The LLS 4000 app connects remotely to any LLS 4000/4000U liquid level switch via Bluetooth. Once they are paired up, you can select between essential functions. For the non-SIL2 variant of the LLS 4000, the app enables you to select between several media1 and select switch function as normally open (NO) or normally closed (NC). You can also monitor performance, including temperature and frequencies. If you connect to a SIL2 variant, you do exactly the same as for the non-SIL2 variant except: A SIL2 variant is locked to a normally closed (NC) function and cannot be changed The app has two modes: Service mode for commissioning and monitoring. If you’re a contractor, you can remain in Service mode to streamline the setup process. If you’re a system owner, the monitoring mode is your best friend—enabling you to quickly check your LLS 4000’s performance while walking by. The app also limits the amount of code numbers you need to track, since the four variants2 of the LLS 4000 can be used in almost any refrigeration application. 1 R717 (Ammonia),R22,R507A,R134a,R404A,R407A,R410A,R513A,R1234ze(E),PAO (Oil),POE (Oil),Mineral (Oil) 2 LLS 4000 liquid level switch G 3/4” LLS 4000 SIL2 liquid level switch G 3/4” LLS 4000U liquid level switch NPT 3/4” LLS 4000U SIL2 liquid level switch NPT 3/4”