Fresh Ventilation vs myAirflow

Fresh Sky Product information: The Fresh Intellivent SKY bathroom fan, a completely ground-breaking, one-of-a-kind fan smarter and more powerful than anything that has come before. With a unique air quality sensor, unrivalled extraction capacity, and advanced moisture control, Intellivent SKY is optimised to produce a fresh and comfortable bathroom climate. Pairing the device and app: Push once on the touch panel on/off symbol and then hold the light/air quality symbol for 8 seconds to activate Bluetooth mode, the symbol starts flashing, then continue in the app by press “Connect” on the paring screen, in a few steps your product is ready. Basic app functions: Press + symbol to add more devices, top right to of the first page to add extra devices into the same app. Press (cogwheel symbol) top right on the main page for additional settings such as: Change name of product, Delete the product from the app or Reset function to factory default setting. App main view: Buttons to activate Boost or Pause. Current running mode shown live with a small icon and the fan speed in rpm. It shows activated functions as black and non-activated functions as grey. There are separate pages for adjusting Timer, Humidity, Constant speed, Light sensor, Air quality sensor, Airing and Pause settings. Fresh FCX 90 Product information Fresh Advance FCX 90 is a quiet ventilation unit with high energy efficiency and high heat recovery rate Paring the device and app Go into the settings of your phone and search for available Wi-Fi networks. Locate the network which matches the device ID (found on the front of the module) and select this. Before going to the next step, make sure that the Wi-Fi symbol is shown at the upper left corner (usually next to your carrier info) Start the Fresh Ventilation App Press + symbol to add a device. Choose FCX 90 and enter the Security Key. (found on the front of the module) Choose your device name. Enter your SSID and Password to your local Wi-Fi network (note that FCX 90 only supports 2.4 GHz networks) Close the app and go to settings on your phone and reconnect to your local Wi-Fi network. Basic app Check the device status, change operation mode, see outdoor, extract and supply temperature, schedule own programs and more. Press (cogwheel symbol) top right on the main page for additional settings such as: Change date/time, Modify WLAN settings, access the commissioner mode, rename the device or remove/delete the device.

myAirflow app – lets you take full control of your iCONsmart functions and features. Bluetooth connectivity allows constant and secure tracking of your extraction rates, ensuring your home is always kept fresh and well ventilated. The iCONsmart is a vital piece of home automation technology which works in sync with the rest of your smart home gadgets, bringing style and performance into your home. A built in Timer module in every iCONsmart. The timer functionalities can be accessed by a unique unlock code found on a timer card. The unique code can be revealed by scratching off the cover on the card. By unlocking the timer module, the user will have access to a wide range of functionalities; adjustable overrun period, silent hours, room refresh and delay start. myAirflow’s unique features - Adjustable humidity range between 35% and 95%, allowing specific control of air extraction - Live status of the fan including installed modules, precise flow rate, humidity and motion sensor readings. - Live room health graph, displaying current humidity levels and rolling log of data usage, tracking the operating hours for the fan. - Customisable silent hours and room refresh features preventing the fan from operating at night and keep the room health optimum. - Adjustable flow rate allowing complete control of your fan