NT OneAPP vs M4BeaconConfig

All new NewType oneAPP Enterprise Management all-in-one oneAPP >> Integrated NewType full range of product APP features, including: FlowMaster BPM WebISO, WebPMIS, WebEIP, etc. >>GPS location report : It is convenient to report your work place, work schedule check-in... and other work location report. >>QRCode / Photography function: Upload photos to return work or for example WebISO system: quick search, find files, etc. >>Provide prevention APP to capture snapshot technology. >> Integrated APP security lock: Support: password, fingerprint identification, FaceID face recognition. >> Support APP Push notification mechanism. This app requires the purchase of the company's system APP module before it can be used. It is only used by employees of the company's corporate customers and does not provide general user services.

M4 Beacon Config is the official configuration tool for Holden International M4 IB-A series BLE beacons, including the IB-A300, IB-A600, IB-A700, and IB-A800 models. Supports both M4 Line Simple Beacon and M4 Security Beacon firmware. The app automatically detects which parameters are available on each connected device and shows only the relevant controls. KEY FEATURES • Scan and connect to M4 IB-A series beacons via Bluetooth Low Energy (BLE) • Read and write all GATT configuration parameters • Configure UUID, Major/Minor, RSSI Calibration, Manufacturer ID, Advertising Interval, TX Power, and LED • Access Hardware ID (HWID), Inventory ID, and Device Message (Line Simple Beacon firmware only) • Automatic GATT attribute detection — fields shown only when supported by the connected device • Traditional Chinese (繁體中文) language support • No internet connection required during configuration SUPPORTED DEVICES • IB-A300 — Compact beacon, battery or Micro-USB power • IB-A600 — Waterproof sealed beacon, ER14505 battery • IB-A700 — USB-C powered beacon • IB-A800 — Advanced sensor beacon with built-in buzzer and temperature/humidity sensor (Gainta G519B enclosure) HOW TO USE 1. Place the beacon in configuration mode by pressing its button or power cycling. 2. Open the app and tap Scan Beacon to find nearby M4 beacons. 3. Tap a beacon to connect. The app reads all current settings automatically. 4. Tap any parameter to edit and write the new value. 5. Disconnect — the beacon immediately broadcasts with the new settings. For technical documentation and firmware information, visit www.m4grid.com.