SR OS Connect vs QR Code Reader & Level

The Nokia SR OS Connect App allows you to configure Nokia IP routing and switching equipment from an iPad or iPhone. Connecting to equipment is a simple Bluetooth pairing operation, allowing simple, fast field maintenance with fewer errors. Configuring an NE using an iPad or iPhone is similar to using a laptop cabled to the NE console port and CLI. SR OS Connect can pair with and configure multiple NEs at one time, improving the field technician's experience and simplifying the process. • Bulk provisioning of multiple devices • NE pre-provisioning and scripts from the NE team • CLI access when needed • Access to iPad or iPhone capabilities, such as location services and camera The SR OS Connect App is supported on iPads running iOS 11 and later and iPhones running iOS 13 and later. The NEs you are connecting must support Bluetooth pairing. Bluetooth is supported on the following NEs: * Nokia 7750 SR-1 running SR OS Release 16.0 R4 and later * Nokia 7750 SR-1s running SR OS Release 16.0 R4 and later * Nokia 7750 SR-2s running SR OS Release 16.0 R4 and later * Nokia 7750 SR-7s running SR OS Release 16.0 R4 and later * Nokia 7750 SR-14s running SR OS Release 16.0 R4 and later 
 SR OS Connect can pair via Bluetooth with a maximum of five NEs during a configuration session.

This is a QR code reader and level designed to look like a head-up display. The screen displays CPU usage, memory usage, pitch angle, and bank angle just like a head-up display. *Apart from the design, this is just a normal QR code reader and level. ■QR code reader - Treat the code as an enemy aircraft and read it as if you were pursuing it. * If you don't need a QR code reader, use it as a level. ■ level - Check the tilt of your device with the pitch angle and bank angle. *Note - It takes a lot of time and effort to detect and read a code. - Up to 100 reads can be stored. If there are more than 100, the oldest will be deleted. - Level measurement results are approximate. - Ads will be displayed on the start screen and code list screen. ■How to use the code reader 1. Point your iPhone at the code so that it is within the detection area. 2. Once the code is detected, position it so that it is within the reading area. 3. Once the code has been read, it will be displayed at the bottom of the screen. 4. Tap the code to go to the code list screen. ■How to use the level 1. The pitch angle indicates the up-down tilt of the iPhone (forward/backward direction). 2. The bank angle indicates the left-right tilt of the iPhone (horizontal direction).