CandyRockStar vs VDateNow

iPhone 1: Start the app while tilting the iPhone 90 degrees left, then set the iPhone to the MR glass "Dangla". 2: You can check the menu by looking at Dangla. When only planetary motion is displayed or the menu does not display well in the field of view, tapping the left button of Dangla with the front facing will display the menu in the front. 3: With the body facing to the right, move the sphere cursor at the center of the screen to the right edge [System menu] of the three menus, and tap the right button (hereinafter "Select"). 4: Next, Select the [Screen size] at the left end of the menu, and a list of compatible models will appear. Select the iPhone model you are using, and then Select [Decision] to confirm the model you are using. 5: Select the scene you want to experience from the [MR] [VR] [AR] that on main menu, and enjoy the application. 6: While using the app, tap the left button of Dangla at any time to display the menu. The functions and roles of each menu are as follows. ***Menu immediately after app start or restart*** [Restart] Returns to the state(menu) immediately after the application start [front] Display the content (SolarSystem) to the Straight ahead. [System menu] Move to main menu ***Main menu*** [ScreenSize] Select the model from iPhone 6S to XS MAX ※ In order to fit the size of the iPhone screen to the size of the mirror and lens, the screen display will be relatively shrunk as the LCD screen size of the iPhone increases. [Two eyes / Single eye] Switch the single eye / both eyes mode [IPD] Correct inter-pupil distance by program [MR] Mixed reality mode, background image is displayed superimposed with live-action image through the half mirror [VR] Virtual reality mode, both solar system and background space display 3D produced images [AR] Augmented reality mode, background image is displayed superimposed with live-action image through iPhone camera [Startup setting] (a preliminary menu for developers) iPad 1: Start the app while tilting the iPad 90 degrees left. Since the iPad can not be put in a Dangla, please enjoy using single eye mode alone. (Explained in 5 :) 2: Menu is displayed on the screen of iPad. If you only see the planet or if the menu does not look well, tapping the lower left corner of the screen while facing the front will bring the menu to the front. 3: Point the your body to the right, place the sphere cursor on the [System menu] on the far right, and tap the lower right of the screen (hereinafter "Select"). 4: Next, Select the [Screen Size] at the left end of the menu to display the list of compatible models. Select (Not [Maximum XS-Max])[Minimum 6S-7-8 Full Screen] and Select [Decision]. 5: Next, Select [Two eyes / Single eye], and when the screen changes, Select [Single eye]. 6: While using the app, tap the lower left of the iPad screen at any time to display the menu. The function and role of each menu are the same as the above iPhone. 【please note】 ・ Do not use this app on public roads or places with many people. ・ Please be sure to play small children always in the safe with parents. ・ Don't aim "Dangla” at the sun. ・ Don't use in the two eyes mode if you are under the age of 13 in the developmental stage of vision ・ We do not compensate for the damage caused by using this application directly or indirectly. © Unity Technologies Japan/UC Distributor https://dangla.jp/

[Application overview] *When you see the marker on the table with the terminal camera, the character sits on the other side of the table. *You can take pictures from any angle you like. *You can change the characters by loading another VRM model you prepared. (You can import VRM model from VRoid Hub) *You can also use VR goggles for smartphones (The camera is not blocked.) to see 3D images. *You can also import and play external motions. [how to use] *Pre-work 1. Print the images shown below in A3 size (210 * 297mm). https://drive.google.com/open?id=1aso6gAUGB4HI2F_N13i5yd0A4FteaKOB 2. Place the printed image on the table where you want the character to appear. * How to operate this application ** How to make a character appear 1. When you start the application, the character list will be displayed, so please select the model you want to display. *Initially, Alicia Solid is the only character. You will learn how to add other models later. 2. Press the Menu icon to delete the Character List window. (Press again to redisplay) 3. Please look at the pictures you prepared in advance through phone camera. 4. When the "character selection" and "Fit image to camera" conditions are met, the characters automatically appear and sit at the table. We're all set. ** After the character appeared - Press the camera icon to take a picture. Take a picture from any position you like. The shot images are saved in the Gallery. - Press cloth icon to hide (or show) marker image. Hide mode is helpful when you want to put objects on the real maker and take pictures. - Press character icon, and she/he appears again. - You can load the other model to change to her/him. *How to Add VRM Models * Cautions * Read and use VRM files in accordance with the terms of use of each VRM file. Click the “Import VRM Files” button and select the model files you want to import. Such files must have the .vrm extension. The previous method used in versions 2.9.0 and earlier — manually placing files directly under the “VDateNow” folder (subfolders allowed) — is still supported. [Privacy Policy] *This application uses the camera of the terminal for AR display. *This app accesses your photo library to save photos [About Default Models] *This application uses the following VRM files as default characters. DWANGO Co., Ltd. "ニコニ立体ちゃん" http://3d.nicovideo.jp/alicia/