FlightPlan! vs 香港保險筆試

This app allows you to visually program a flight plan for the Tello Drone and then upload it to the drone for execution. You can also fly the drone manually with the app if you wish. Real time telemetry from the drone is displayed on the glass cockpit. Tello is a mini drone equipped with a HD camera that is manufactured by Ryze Robotics and includes a flight controller with DJI smarts. We access the Tello API by connecting to the airframe via a WiFi UDP port. Once a connection is in place, the drone is controlled using simple text commands. So before using the app, make sure that your Tello drone is on and the iPhone is connected to the Tello WiFi. You can check this by going to Settings -> WiFi. The first time that you use the app it will request your permission to use Location Services. This is required to allow the app to determine the SSID of the WiFi connection so we know when you are connected to the drone. The app doesn't use location services for anything else. The app has two modes of operation: manual and planning / auto pilot. The app status is shown in the top centre panel. This panel also indicates whether WiFi is connected or not. It may take a few seconds for a change in WiFi status to be displayed.  If you are connected to the Tello and in manual mode, then tapping the take off icon will cause the drone to auto take off and hover. Tapping land will auto land. Only tap emergency stop if necessary as it will immediately stop all four motors and the drone will fall out of the sky! Tapping the plan button toggles the app state between planning mode and manual mode. In planning mode a grid (representing the ground) and yellow arrow (representing the drone), will appear. The arrow direction indicates the front of the drone. In planning mode, you can enter the sequence of commands which will be transmitted to your drone for execution. Start with take off or you will receive a warning message. When you are finished with your flight plan tap land. The arrow will simulate the position of the drone but is not to scale. Tapping the upload icon will send your flight plan to the Tello and execute it. While the plan is being flown, the app will display the glass cockpit. Real time telemetry from the drone is displayed on the glass cockpit. This includes pitch, roll, yaw, velocity (x, y, z), temperature, time of flight (tof), height, battery percentage, motor on time, barometric pressure, and acceleration (x, y, z). A full description of how the app operates is provided at our website (reefwing.com.au). FlightPlan is a refined version of another that I described in an article called "Programming the Tello Drone using Swift." (https://medium.com/@reefwing/programming-the-tello-drone-using-swift-f9122fd4aeb8?). You can refer to this article to understand how the app operates and create your own version.

App功能包括： 1. 順序練習：考生可以分別針對卷一、卷二、卷三部分試題進行溫習，溫習完所有試題之後，考生可以重新打亂試題次序，再次練習，方便強化練習。 2. 收藏功能：考生可以選擇有需要針對練習的題目進行收藏，之後可以於收藏功能中強化練習。 3. 錯題功能：對於考生練習以及模擬測試過程中答錯的題目，會被歸類到錯題功能中，考生只有於錯題功能中答對該題，題目先會於錯題功能中消失。錯題功能會同時記錄每道題答錯的次數，方便考生針對易錯題目加強練習。 4. 模擬測試：模擬真實考試程序，方便考生參加考試之前評估考試成績，熟悉考試程序。 保險筆試App由Lemongene Technology Limited開發，本公司提供各類筆試考試和筆試資訊，幫助學生輕鬆考取各類專業牌照。筆試產品包括“學車王-模擬筆試搵師傅一站式平台”和“香港的士筆試-學車王。