4service NFC vs LiveLink ONE

Define. Transfer. Analyse. Users of the 4service NFC app can configure and analyse Tridonic LED drivers with NFC interface free of charge. Application The 4service NFC app enables quick and easy configuration and analysis of Tridonic LED drivers. This makes the work of installation engineers, maintenance officers and employees in similar fields significantly easier. Functions The following functions can be configured via the app, provided they are supported by the respective Tridonic product. Set the driver parameters: - LED output current Set the LED output current (in mA) to adjust the brightness - Device operating mode Selection of the device operating mode (DALI, corridorFUNCTION, chronoSTEP, etc.). - DALI addressing Set the DALI short address - corridorFUNCTION Configuration of the corridorFUNCTION (light level, fade times, etc.). - chronoSTEP Configuration of the chronoSTEP profiles EZ easy addressing decoder An addressing tool is available to convert the Bi-colour LED binary identification signal to a DALI address of between 0 to 63. Easily transfer driver parameter settings With the copy function, you can quickly and easily copy a device's settings to identical devices. This saves time when replacing faulty devices and when commissioning several identical luminaires. Transfer configurations from deviceGENERATOR With the app, configuration files that were created with the deviceGENERATOR (ending: *.trgf) can also be transferred on LED drivers. Driver analysis If an LED driver is faulty, the data memory can be readout. This means an initial analysis of the causes is already possible on site. Product information Retrieve further information about Tridonic products, simply scan the NFC tag or the QR code on Tridonic devices. The following prerequisites must be met before you can use the app: - Use of an LED driver with NFC interface from Tridonic. - NFC reader with Bluetooth connection from FEIG ELECTRONIC or Tertium Technologies. Alternatively, the internal NFC reader can also be used on different smartphones. - Active Internet connection for first-time use and for updates. An Internet connection is not absolutely necessary for ongoing operation. To ensure that the app works properly, however, the device-specific data must always be current, i.e. regularly updated. - If any of the driver's functions are protected by the luminaire manufacturer (e.g. by a password), these cannot be changed even with the app. The 4service NFC app is itself is free of charge. But costs might be incurred for the required internet connection.

Intelligent lighting management can be so simple. With LiveLink, you control all your lighting efficiently via a single application and benefit from additional energy savings of up to 35%. Right from the first start, LiveLink is ready for operation and fully functional. All system participants are recognized automatically, sensor functions such as motion detection and constant light control are preconfigured and active, connected pushbuttons allow you to switch and dim the lighting. If the lighting consists of Tunable White luminaires, among others, the TRILUX HCL curve is also already activated. The LiveLink app also enables simple and flexible configuration of the LiveLink light management system. Intelligent control and feedback functions give you maximum security and support you every step of the way. The most important features - Safe commissioning and operation of the lighting combined in one app. - Intelligent plug & play function. - Individual control of rooms and zones. - Division of luminaires into luminaire groups. - Simple linking of sensors and pushbuttons to luminaire groups. - Creation of lighting scenes and setting of sensors. - Control and feedback functions. During the development of the LiveLink software, the specific needs of the users were in the foreground. They were developed in close cooperation with planners, installers and users. For more information on LiveLink, please visit: www.trilux.com/livelink