Visual Multi vs LevLr2

This is an AUv3 compatible visual effect plugin which is intended for use inside your favourite DAW such as Cubasis, Auria, Meteor, AUM etc. It will not function as a standalone app. Visual Compressor is a 4 band compressor/expander which has the ability to analyse audio in real time giving an accurate and reliable spectrum representation of your signal as well as visual feedback of compression or expansion levels. It's uses range from final mastering of songs to dynamic manipulation and EQing of drum tracks. What makes this different from a normal compressor is the ability to compress or expand frequency ranges rather than the whole mix, with up to 4 bands available. This allows you to say tighten up a wayward snare drum while adding that extra punch to the bass drum while leaving the rest of the track intact. Each of the 4 configurable frequency bands can be modified using drag and drop operations directly on the graph making it easy to understand and quick to configure. Turn on the labelling option for colour coded details. Each band can function as an EQ allowing raising and lowering the bands gain by +/-24dB. You can assign either a compressor or expander to each of the bands. The compressor allows you to compress excessively loud sounds that exceed a specified threshold. Each band has configurable attack, release and ratio settings. The expander can be used to expand sound exceeding the threshold while compressing anything below it. This makes it useful for adding dynamics or even for noise reduction of a specific band. Each band has mute and solo buttons so you can audition what is coming through a certain band, great for use during band frequency setup. There is also a bypass option which removes a band from use and reduces CPU load. You can load and save custom presets as well as copy and paste settngs between instances. This is great if you need to setup multiple instances with the same settings. One of the cool features is the ability to save up to 3 mixes and switch between them for comparision. These mixes are actually saved as part of custom presets and as the saved state in your DAW. This is the third of three products which will make up part of the 'visual' range of effects. Main Features: ○ 4 distinct frequency bands. ○ Assignable Compressor or Expander. ○ +/-24dB gain per band. ○ Assignable Q to control precise crossovers. ○ Spectrum Analyser with 'Pre' and 'Post' monitoring. ○ Vertical shift and scale options for the spectrum. ○ Mute and Solo buttons for each band. ○ Save & Compare up to 3 separate mixes. ○ Bypass option to remove a band and reduce CPU load. ○ Create and save custom presets. ○ Copy / Paste presets between instances. ○ Compressor / Limiter with Auto Makup Gain. ○ Twin VU meters with RMS/Peak display as well as peak and gate lights per band. ○ Brick wall limiter. ○ Quick Reset options for each section of the effect.

LevLr2 Dynamics Processor Plugin (AUv3) LevLr2 is an audio effect plugin that can run standalone, or in any AU compatible host application such as Logic Pro or GarageBand. To configure audio settings in standalone mode, tap the Settings button. Please note that the input will be muted by default to avoid nasty feedback! Overview The LevLr2 "leveller" is a dual stage compression and limiting processor with optional clipping stage. I created LevLr2 after receiving messages from people who really liked the simplicity of LevLr, but wanted a bit more control over its internal workings. LevLr2 combines two dynamics processors and has options to select ratios for both compression and limiting, and adds "parallel compression" plus hard and soft clipping functions. While LevLr2 isn't intended to replace your favourite mastering signal chain, it's relatively much lighter on CPU and adds virtually zero latency, so is also suitable for live use. The super fast attack times under the hood also makes LevLr2 great on drums, especially when using parallel compression. For a super-simple lightweight "mastering suite" you could partner LevLr2 with SimplEQ. LOOK AFTER YOUR EARS / SPEAKERS! LevLr2 can make things VERY LOUD, so please be careful with extreme / high values or when using the Randomize function! Controls Active - Toggles the effect On or Off. You can use this control to A/B your settings with the original signal and this will fade gradually between the two with no distracting pops or clicks! Comp - Activates the compressor stage by selecting a compression ratio. Typically lower values are more subtle. In - Determines how hard you drive the compressor. You can also think of this as the compressor threshold, so for example, at 6dB on the In slider, the threshold of the compressor will be -6dB. The compressor also applies makeup gain automatically based on restoring a 0dB level signal after it has been compressed. Mix - Sets the balance between the incoming and compressed audio. At zero, this will be the same as if the compressor was bypassed, and at 100% is the compressed signal only. A good parallel compression effect can be achieved by setting the Comp ratio and In high and the Mix to around 50%. Limit - Activates the limiter stage by selecting a limiter ratio. Typically lower values are more subtle and the highest value is close to "brick wall" limiting. In - Determines how hard you drive the limiter. You can also think of this as the limiter threshold, so for example, at 3dB on the In slider, the threshold of the limiter will be -3dB. The limiter also applies makeup gain automatically based on restoring a 0dB level signal after it has been limited. Clip - Adds an optional Soft or Hard clipper after compression and limiting. The clipping will be more noticeable once you've applied some compression and limiting and depending on the settings, can add subtle warmth to aggressive crunch! Out - Applies a final stage gain trim to the output at the very end of the internal signal chain. In theory, the LevLr2 output should never exceed 0dB, but if you're driving levels really hard, you may want to back this off to around -0.2dB to avoid inter-sample peaks (ISPs) further downstream when recording or mixing-down for example. For more info and support please visit: www.waverley-instruments.com/robjackson