Luxilux Light Meter vs Light Lamb

You like using your old film camera but it doesn't have a built-in light meter? The built-in meter is broken or requires special batteries? With Luxilux you always have a light meter in your pocket. --- METERING --- Luxilux will take an average reading of the image you see in the preview. Specify the area for the meter reading even more accurately by zooming in or out. If your device has two or three back cameras, you can switch between them. You can also tap on points of interest to expose correctly for them. --- MODES --- Use Luxilux in aperture priority mode (Av) by choosing the ISO and aperture, and Luxilux will calculate the right shutter speed to get a proper exposure. Use it in shutter priority mode (Tv) by choosing the ISO and the shutter speed, and Luxilux will calculate the right aperture to get a proper exposure. Manual mode (M) lets you change all values and shows you how much they differ from the calculated optimal exposure. --- SAVE EXPOSURES --- Tap "Save" and the currently selected settings are saved alongside a preview image into your photo library. If you give location permission you can also save where the measurement was taken. You can view your saved photos in Luxilux or in the Photos app. --- PROFILES --- You can choose between full stops, half stops or third stops for ISO, aperture and shutter speed. Specify the minimum and maximum values that your combination of camera, lens and film supports. Save these settings in profiles so you can quickly recall them.

Light Lamb is a free photographers’ light meter app for iOS. You can let Light Lamb decide everything for you like getting an auto mode for your manual film camera, or you could have full manual control of the parameters, or whatever you want in between. - Now with histogram (New in 1.3.0) Use the histogram to make sure the scene is exposed just like how you envisioned. - From full auto to assisted manual control In most cameras if you pick a parameter like aperture, shutter, or ISO, the camera would stick to your chosen values even if it's too dark or too bright for the scene. The reason we made Light Lamb is to have a light meter that would suggest different settings if the chosen parameters are not suitable. For example, you can keep your settings at f/8 and 1/125 for deep depth of field and fast shutter speed, but if it's too dark, Light Lamb would suggest brighter values to make sure it's correctly exposed. Or say you want to set the aperture to f/1.4 for shallow depth of field, and if it's bright outside and the shutter is already at its fastest speed, Light Lamb would suggest a smaller aperture. Just set the parameters to what you want and Light Lamb will handle the rest. - Safe shutter-aware Pick a preferred slowest shutter speed you want and Light Lamb will match it. If the scene is too dark, Light Lamb automatically pick a slower shutter speed beyond the safe shutter to achieve the correct exposure. - Spot metering Zoom in 5x to focus the measurements to small areas in contrasting scenes. - Match your equipment Choose the range and increment of ISO, aperture, and shutter speed to match your equipment. Choose between whole-stop, half-stop, and one-third EV increments for each parameter. - Keep a memo Keep a memo of the settings used, including a photo of the scene and the location. Export it as a beautiful picture note formatted in 4:5 aspect ratio, great for posting to Instagram along with your photo.