10Scene vs Cue Light

The 10Scene app allows remote control of ChamSys 10Scene lighting zones. SnakeSys 10Scene Wall Plates and SnakeSys 10Scene Gateways enable up to 50 different zones of 10Scene operation and trigger inputs. 10Scenes can operate in a simple mode with minimal configuration, or in an extended mode with manual configuration per Zone. 10Scene Wall Plates are connected to MagicQ via one or more 10Scene Gateways. Please ensure you grant Local Network access in device Settings to allow the app to communicate with MagicQ. If 10Scene does not appear in device Settings then select 'Connected with QR code' and allow Camera access.

This app will need to run on 2x different instances on the same network for proper testing. It is designed to replace or offer a cheap alternative to wired theatre cue lights. The intent is to have a DSM (stage manager) able to inform the people operating lights, sound etc. to stand by to perform an action and to execute that. One device should have a name assigned in DSM mode and the other a different name in receiver mode. Enter settings on the DSM device then on the receiver press broadcast to DSM. you can then add this device and they will be linked. Click standby on the dam device and both will illuminate, then click the standby on the receiver device to acknowledge (both turn yellow) then press go on the DSM device to turn both green. No regional differences. No a highly regulated industry and no information leaves the device at all. OSC is an open standard, no external services in use.