CPFlash vs p10trancer

CONNECT YOUR INNOVATRONIX CPFLASH 550W DEVICE Have full control of your Device by connecting it to the App through Bluetooth Pairing. The connected Device will be your Master Device and you can use up to 4 Slave/Channel. You can change the Address of your Slave/Channel from Slave 0 to 7 or make it Inactive. ADJUST THE FLASH & FX POWER Adjust the Flash Power Settings of your Master Device and Slaves separately. If the Video Light Fx is On, you can adjust the Fx Power Settings. The Power range is 0.5% to 100%. FLASH DURATION & TEST FLASH Set the Flash Duration of your Devices from 80 to 500 ms. Adjust it higher if the Flash and Camera is not in sync. You can also test your Devices individually or all at once. VIDEO LIGHT FX There are 8 different Effects to choose from (Continuous, Flickering, Lightning, TV, Paparazzi, Police, Strobe and Fire). You can set different effects for each Device. You can also Turn On or Off your Devices individually or all at once. If the Light Effect is On, you can change the Power of the Effect. TRIGGER YOUR DEVICE Trigger your Device using the App's Notification Actions. Make sure the Notification is Started. Once you minimize the App, Open the Camera App and wait for the Notification Informing you that your Device is Ready. Drag it down to see the Actions then click the Trigger button. You can also delay the Trigger by clicking the Self Timer button or Turn ON/OFF the Video Light Fx.

p10trancer is an iPad-native live video instrument for VJs and visual artists, inspired by the rich lineage of video mixers and samplers. Nine pads in a 3×3 grid, two output channels, a master fader, and effects you dial in by feel. Every gesture is performed live — there is no timeline, no track view, no beat grid. Plug in, hit a pad, see what happens. WHAT'S INSIDE • Nine independent video pads. Each pad can hold a video file, a still image, the iPad's front or back camera, a USB-C UVC camera (HDMI capture box, webcam), the keyer's composite output, or the master mix as a feedback source. • Two output channels with five master-mixer transitions: blur crossfade, linear swipe, star swipe, chroma key, luma key. A position fader sweeps between channels. • A six-effect rack on every pad: blur, internal feedback, chroma distortion, YUV phaser, luma phaser, edge enhance. Effects are bypassed by default — engage what you need. • Two independent pad-to-pad keyers, each with chroma or luma keying, threshold and softness. Keyers can chain (one keyer's foreground sources from another keyer) and self-feedback. • A simulated composite-NTSC pipeline. Frames are encoded into a simulated composite waveform with 4× horizontal oversampling, glitch effects mutate the encoded composite, and the result is decoded back. Chroma boost, HSync wobble, subcarrier drift, Y/C delay, dropouts, banded noise — every artifact is the kind of thing a real analog video processor produces, because it's produced by the same kind of operations. • HDMI external display through a DP-Alt-Mode USB-C dongle, switchable between HD 720p and NTSC 4:3. • Per-pad audio mixed through AVAudioEngine. Audio follows whichever channel its pad is routed to. Master output captures to MP4.