Teradek Launchpad vs LDX Scanner

Manage every parameter of your Orbit PTZ system from the convenience of your smartphone. Pairing - Pair transmitters and receivers right from your iPhone or iPad. PTZ Camera Control - Configure your PTZ camera settings, such as pan, tilt, zoom, focus, etc... with your phone. No camera control unit is needed to enable this function in the app. Spectrum Analyzer - Scan local wireless spectrum and configure the optimal 5GHz channel for your Orbit PTZ. Channel Selection - Manually select a 5GHz (40 MHz) channel. Orbit PTZ can also be set to operate over 20 MHz channels for better wireless performance. Quality/Range Analyzer - Monitor the quality and range of your wireless link. 3D LUT Selection - Achieve the look you’re after with Orbit PTZ’s integrated 3D LUT technology. Select from LUT presets or upload your own into the app. Quality Selection - Choose between several modes of operation: Maximum Quality, Maximum Range and Balanced. Output Format - Select the output resolution and framerate. Test Pattern - Output a test pattern. Audio Settings - Enable a tone to ring when camera recording is triggered, or mute sounds on the device. Display Settings - Adjust display light output. System Info - Check the current firmware version and apply updates when available. Also performs factory resets directly from the app.

The LDX Scanner is an app that uses NFC to wirelessly communicate with the Grass Valley LDX 100 Series broadcast cameras. This app allows you to read-out diagnostics of the LDX 100, even when the camera is powered off completely. This is important, because this means that during the logistical part of the operation, there is no need to build-up the camera, power it and go through the camera's menus (although they have been build-up ergonomically as well). The information you can read-out with the LDX Scanner includes things like the serial number, installed package version, the IP address where the camera can be reached, installed Options/Licenses and the last known configuration. All the things you need to successfully integrate the camera into your infrastructure. You can also easily export the retrieved information by sharing it as a PDF via the phone's communication methods, like mail. In addition to reading-out these diagnostics, the same app can also be used to install new so-called Options (Licenses). Yes, again even when the camera is switched off. Once the Option is cut via the customer's on-line License Management tool, it can be sent to the operator and he or she can then use the LDX Scanner to transfer the Option to the LDX 100 Series. In case the camera is powered-off at the moment of transfer, the camera will validate and install the new Option at the next boot cycle of the camera. The LDX Scanner app fits with the logistical reality of Broadcast Operation and is the ideal tool to get your LDX 100 broadcast camera up-and-running in any IP infrastructure within minutes. Please make sure you have iPhone 7 or newer model with at least iOS 14 installed.