STL Simple Viewer vs Gyroscope+ Level IMU Logger

STL Simple Viewer is a great app to quickly view STL, 3MF & DXF 3D files and export them to the most commonly used CAD formats. Features: - Supports STL files both ASCII and Binary formats. - Supports 3MF & DXF files. - Load files directly from ZIP archives. - Export to DXF, OBJ, DAE, PLY, USD, STL & 3MF. - Measure distances between points within your model. - Rotate, pan, and zoom models with intuitive touch controls. - Configure rendering options: faces, edges, points, background and transparency. - Render using a clipping plane (useful for viewing model interiors). - View models in Orthographic or Perspective mode. - Obtain model information including triangle count, bounding box, surface area, and volume. Privacy Policy: https://www.boviosoft.com/apps/privacy.html Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ For support or questions: support@boviosoft.com

Gyroscope+ Level IMU Logger shows how fast your phone rotates the moment you open it, on every axis, then turns each measurement into a result you can read: press Start, press Stop, and a session card shows the peak rate, the average rate and the peak on each axis. ▶ Live rotation rate from the first second • The gauge moves as soon as the screen opens; no button needed to see the rate • Roll (Y), pitch (X) and yaw (Z) rotation rates side by side, plus the combined rate • Pick °/s, rad/s or rpm with one tap (360 °/s = 60 rpm) • Roll, pitch and yaw angles, and a scrolling chart of each axis ▶ Stop and see the session Press Start to record, then Stop, and a Session result card appears: • Duration, peak rate and average rate in the unit you picked • The peak on each axis: roll, pitch and yaw • A second-by-second trend line (up to 30 minutes) Every finished session is saved to History once (the last 50). A recording shorter than 2 seconds is not saved. If you switch apps mid-session, recording pauses in the background and the same session continues when you return, and a session cut off when the system closes the app is recovered into History on the next launch. Share a result as text in one tap. ▶ Recording that you can trust • Hold the phone still for a moment when a recording starts (the first 20 samples, 2 seconds at 10 Hz) so the sensor's resting offset can be measured; it is only taken when the readings show the phone held still (a turn slower than about 1 °/s cannot be told apart from that offset) • Min, average, max and peak while you record, plus peak-hold chips for each axis with Clear • 10 Hz by default, 50 Hz in high-precision mode • Zero sets the current angles as your reference; a 0.5x–2.0x sensitivity control scales the displayed and recorded rotation rates (not the angles) ▶ Turntable rpm and Wow & Flutter Switch to rpm to read the spin of a record player or any platter lying flat: the app compares it with 33⅓, 45 and 78 rpm and shows the deviation in %. A 10-second Wow & Flutter test at 20 Hz grades the speed stability as good, fair or poor. ▶ Attitude and sensor health • An artificial horizon for pitch and roll, and a gyro heading that you can reset (it drifts slowly, as every gyro heading does) • A sensor health check at rest reports the offset and noise on each axis as good, fair or poor ▶ Bubble level The Level tab reads the accelerometer: a 2D bubble with surface, pitch and roll angles. Calibrate on a flat surface you trust. To check a surface, measure, turn the phone 180° and measure again; the true error is half the difference. ▶ History and export Every session with its trend, exportable as CSV (rates in °/s). The recording itself exports as CSV too, up to 18,000 samples. A statistics CSV of all sessions unlocks for 24 hours after a short ad. ▶ Good to know Readings come from the phone's own gyroscope and accelerometer, so keep the phone away from strong vibration and re-zero if angles drift. The heading is gyro-based, not a compass. A Guide tab explains every axis and unit. Interface in 30 languages. For makers testing gimbals and drones, vinyl fans checking turntable speed, physics students, developers checking motion sensors, and anyone curious how fast something spins.