RA660 mission control vs Zerico CCM

RA660 Navi Mission Control The RA660 Mission Control app connects your RA660 Navi XL to your device. Get full control over the cleaning process and additional equipment, such as the Cleanfix Charging Assistant, no matter where you are. Keep all your cleaning records stored in one place. The RA660 Navi XL sends all important information about its cleaning missions directly to your device, and this data can be exported as PDF reports. Cleaned zones can be displayed on a map and filtered by defined name, date or location. Notifications such as completed missions are sent directly to your device and displayed as push messages (if enabled). Command your robot Start, pause, stop, and plan your cleaning tasks directly from your mobile device via the Mission Control app. Send the robot back to its charging station and start the charging process with the optional Cleanfix Charging Assistant at the touch of a button. Choose between autonomous and manual cleaning modes. Autonomous mode, combined with the docking station, lets you refill water and charge the battery fully automatically. The charging and refilling cycles run simultaneously in a safe, streamlined process. It is also possible to monitor the recharging process with live data in the RA660 Navi Mission Control app. Simple setup and connection Monitor all the RA660 Navi XL, RA660 Navi XL Gen 2, and RA660 Navi M robots connected to your Cleanfix account from the same app. The availability of some of the described features depends on the connected robot models and license types.

SMS configure, control, and read the status of Zerico and Selektro CCM devices. ZERICO CCM has changed name from Selektro CCM. The Zerico CCM app can be used to easily configure, manually control, and read out the status of the Zerico CCM modules. The app does the job of sending the necessary SMS instructions to the modules, depending on the type of configuration that has been defined in the application and the types of procedures that are to be performed. SMS messages configured for automatic transmission from the modules, for example alarms, will be received as standard SMS messages and do not require installation or use of the app. The Zerico CCM app can store the configuration of and manage several modules simultaneously. A unique configuration ID accompanies each communication, which ensures consistency between the configuration stored in the app and that in the modules. The Zerico CCM app has only limited functionalities on the iPad. It is recommended that version 2.1.x and upwards being used with the app.