MatrixA8 V3 vs Level

The MatrixA8 V3 application allows you to control one or more of the MatrixA8's main functions. - Adjust the volume of all inputs and outputs. - Full access to Matrix functions. - Load and save presets on the device. - Lock the system and set a password. - If the DANTE option is installed on your MatrixA8, you can manage DANTE routing. - Users can customize channel names saved locally or synced with the device. Note: This application currently only supports Matrix A8 V7.0 II and later models.

Level is a fast, honest sound-level meter for iPhone. A big live decibel reading, plus Leq, Min, L90, and Peak alongside it — toggle on only what you need. A built-in reference generator and calibrated-mic support are there for speaker work or true SPL. One clean instrument, not a busy suite. FEATURES Big decibel reading — A/C/Z weighting, Fast (125 ms) or Slow (1 s) response Four toggleable stats in a 2×2 grid: Leq (energy-average), Min (quietest moment), L90 (background level — exceeded 90% of the time), Peak (true instantaneous peak). Always computed; show only what you need Peak-hold "Max" — a marker holds the loudest moment; tap to reset Reference signals: pink noise, white noise, ten octave tones (31.5 Hz–16 kHz), level-matched. 1 kHz tone pairs with a 94 dB calibrator Play any output — iPhone speaker, AirPlay, Bluetooth, or USB — while the meter keeps reading Calibrated-mic support: Dayton iMM-6C, miniDSP UMIK-1/UMIK-2/EARS, Behringer ECM8000, REW. Frequency correction plus a true-SPL anchor from the file's 1 kHz sensitivity Manual calibration offset Share card — current reading, your enabled stats, and the level bar Full VoiceOver support No account, no analytics, no third-party SDKs, no in-app purchases, no network connections HOW IT WORKS Open Level, allow the microphone, and read the room. Turn on Leq, Min, L90, and/or Peak in Settings → Readings to see them beside the live number in a 2×2 grid. Tap the meter to reset Max and every stat. For speaker work, tap play to send a reference signal to any output — pink noise for level-setting, white noise for tweeters, an octave tone for room modes, or the 1 kHz tone against a 94 dB calibrator. Long-press play (or use Settings) to switch. With the built-in mic, readings are approximate but honest and well-behaved. A calibrated USB mic and its cal file give true SPL. Either way, Level is a measurement tool, not a certified Type 1/2 instrument. GREAT FOR Checking if a room, party, nursery, or workspace is too loud Home theater/hi-fi — matching channels, setting levels, dialing in a subwoofer Car audio — matching and balancing components Live-sound hobbyists and DIY speaker builders Anyone who wants an honest number, without a pro measurement suite PRIVACY Audio is measured live only — never recorded, written to disk, or transmitted. No account, no analytics, no in-app purchases, no network connection at all. QUICK START Open Level, allow the microphone Read the big number (A-weighted by default) Settings → Readings: turn on Leq/Min/L90/Peak to add them to the grid Tap the meter to reset Max and every stat For speaker work: tap play to send a reference to any output; long-press to switch signals IMPORTANT Level is a general-purpose meter, not a certified Type 1/Type 2 instrument. Built-in mic readings are approximate; a calibrated USB mic with a cal file gives true SPL.