7XWAVE Sample Synth Loop Maker vs PhaseII
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
7XWAVE Sample Synth Loop Maker
This app offers a 7-channel sample sequencer with advanced synth and modulation features for intricate sound manipulation. Create beats, glitch effects, and complex loops with extensive editing and real-time parameter control. Export your creations or sync with other music applications.
- 7-channel sample sequencer
- Animatable modulation
- Sample mangling and glitch effects
- Real-time parameter recording
- Independent sequence lengths
- Built-in effects (distortion, reverb, delay)
- MIDI and Ableton Link sync
Read full descriptionHide full description
7XWAVE - a 7 channel sample sequencer with synth features & animatable modulation features for sample mangling. So many sound manipulation possibilities can be had with this whether it's a funky electro backing track or crazy granular glitch effects. Choose a sample, tweak the sound using envelopes & filters then create your beats and bleeps. Add effects to each sound, pan, level, sample start, length pitch & filter. Mash up loops and sequences with trimming and shuffling. Each step can have a start stop or end stop , shuffle up your samples or turn them into wave cycles like a synth, then animate the start position. Lots of glitch or time stretch effects! Lock parameter dials to a step or record dial movements in real time. All sequences can be set up to 1-64 steps. Export recorded loops or route audio into Audiobus or AUM etc keeping in sync with other apps using MIDI or Ableton Link. Sequencer Specifications & synth features: Animate or manually set levels for every track dial. Each program has swing/groove, independent sequence lengths from 1-64 plus offsets, Randomiser with 0-100% chance of a step in realtime, Accent levels on tracks for how much the accent affects pitch, frequency & volume dynamics. Notes are easily created on current bar. Double tap = accented dynamics. Hold down for copy, paste & clear. Fill 64 steps expands current sequence to 64 steps repeating to fill. Random generations of notes.. Hi, low or band pass filters, resonance, filter env & decay like in most synthesisers. Also Hi split adds parallel hi pass. Sample start, length & loop point, loop on/off, ping ping & reverse. Edit samples small enough to waves to use as a synth "oscillator". Loop level allows you to play loop back to point in Sample or at the very end for for tight looping and glitch repeat effects, granular fx and sample mangling. Slice/divide the sample start point to the track sequence length. You can then re-shuffle steps for glitch effect,Adjust pitch, volume attack & release or gated volume. Adjust pitch or set it automatically to fit the sequence and BPM (good for importing loops to match). Distortion, Delay (snaps to nearest time sync), reverb and compression effects. Each sequence has one LFO with adjustable speed and can modulate sample start/length , filter and pitch. LFO can also gate triggered for an Envelope effect. Built in keyboard for playing your samples using keys or selecting the random notes for random generation in step edit. Mixer console view so you can adjust pan, bass and levels. Import samples from other apps documents folders, Audioshare or copy/paste. Export you trimmed sample to this app document folder and export your recorder loops. Record what you are playing to export to another app or computer for composing yous loops. Play in sync your sampled loop with your current program. Route the audio output into other apps like Garage band, Audiobus or AUM with other apps. Ableton Link / MIDI syncs to sequencer. This is not an external audio input sampler but it can resample and those samples can be used as sound sources for synthesising. Manual: http://beatsnbobs.com/manuals/7xwave-manual.html Included is a help function. Any problems or ideas please let me know. Cheers Rob
PhaseII
This audio effect plugin offers a dual stereo phaser with a vintage sound. It allows for independent phasing engines in parallel or series, with selectable modes for subtle to extreme effects. Controls include rate, depth, width, drive, and mix for versatile sound shaping.
- Dual stereo phasing engines
- Parallel and series processing modes
- Selectable effect modes (subtle to extreme)
- Adjustable rate, depth, and width
- Optional drive for analog warmth
- Soft limiting to prevent clipping
- Mix control for wet/dry balance
Read full descriptionHide full description
PhaseII Dual Stereo Phaser Plugin (AUv3) PhaseII is an audio effect plugin that can run standalone, or in any AU compatible host application such as Logic Pro, GarageBand or AUM. Overview PhaseII is a dual stereo phasing machine with a vintage vibe! As well as traditional super-wide stereo phasing effects, PhaseII can also produce all manner of swirly modulated goodness by running the independent phasing engines in parallel or series. Selectable modes allow quick access to finely-tuned settings under the hood that "just work", from subtle to extreme - just the thing if you find some phasers to be overly complex with too many parameters! Set Rate and Depth to taste, adjust the stereo Width, then you can even add some gritty Drive for some "analog" warmth. Controls Active - Bypasses the effect (Off) or selects one of the following processing modes: Stereo - Two independent phasers for the left and right channel, with LFOs 90 degrees out of phase for a stereo effect, determined by the Width control. Parallel - Two independent stereo phasers for the incoming audio, which are then summed together at the output stage. The LFOs for each of the four phasers are 90 degrees out of phase for a stereo effect, determined by the Width control. Series - Two independent stereo phasers with Phase I processing incoming audio, which is then passed on to Phase II for a double-helping of phasey goodness at the output stage! This is potentially the most dramatic phasing effect, especially with the Width set to maximum as each of the four phaser LFOs are 90 degrees out of phase. The following controls apply to each phase stage, referred to as Phase I or Phase II: Phase I/II - Toggles the Phase I or Phase II processing engine On or Off. Rate - Sets the rate of the phaser LFO in Hz. Depth - Sets the depth of the phase effect. Mode - Selects one of four different modes. Each mode configures several "under the hood" settings - think of each mode as a mini preset for internal parameters. Modes range from subtle (I) to extreme! (IV). The following controls are global: Width - Adjusts the stereo width from super-wide to monophonic. Note this only adjusts the "wet" phased sound so your original stereo image remains intact for the "dry" signal. Drive - Applies an optional amount of warm overdrive to the phaser processing only, for a bit of a vintage vibe! Mix - Balances the processed audio with the incoming / dry signal. At zero, the output is totally dry, and at 100%, the output is totally wet and phased to the max! The phasing effect can sometimes create loud resonant frequency peaks that could result in clipping. To protect against this, soft limiting is applied at both the phasing processing stage and at the final summed output. If the input levels are high, this can add to the "analog" like sound of PhaseII when compression and saturation occurs. About The UI Not everyone likes the UIs of my latest (2025) plugins - I get it. However, the simplistic and generic approach allows me to (a) 99% focus on the DSP, sound quality and CPU performance, and (b) significantly reduce the development (and potential maintenance) time, which is reflected in my pricing. For more info and support please visit: www.waverley-instruments.com/robjackson
Screenshots
Verdict
The clearest difference is review sentiment: PhaseII at 100% against 7XWAVE Sample Synth Loop Maker's 57%. PhaseII also leads on rating (5.0 vs 4.2) and iOS requirement (12.0 vs 15.6). 7XWAVE Sample Synth Loop Maker's advantage is ratings volume (10 vs 2). On price, update cadence, ads and in-app purchases there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
7XWAVE Sample Synth Loop Maker costs $1.99 and PhaseII $1.99 up front. Neither carries in-app purchases, so what you see is what you pay.
PhaseII holds the better App Store score, 5.0 against 4.2. That said, the two scores are not equally well evidenced: 7XWAVE Sample Synth Loop Maker has 10 ratings behind it against 2, so its average is the more settled of the two. Written reviews point the same way: 57% of 7XWAVE Sample Synth Loop Maker's written reviews are positive against 100% of PhaseII's.
7XWAVE Sample Synth Loop Maker ships an update every 10 days, PhaseII every 9 days. The most recent releases landed on November 19, 2026 and November 12, 2026 respectively.
| Parameter | 7XWAVE Sample Synth Loop Maker | PhaseII |
|---|---|---|
| Price | $1.99 | $1.99 |
| Rating | 4.2 (10 ratings) | 5.0 (2 ratings) — better |
| Positive reviews | 57.1% of reviews | 100.0% of reviews — better |
| Number of ratings | 10 — better | 2 |
| Update frequency | Every 10 days | Every 9 days — better |
| Ads | No | No |
| In-app purchases | No | No |
| Monetization | Paid | Paid |
| Devices | iPhone, iPad, iPod | iPhone, iPad, iPod, Mac — better |
| Requires iOS | 15.6 | 12.0 — better |
| Further details — not scored | ||
| Size | 49 MB | 13 MB |
| Age rating | 4+ | 4+ |
| Developer | Rob Wilmot | Rob Jackson |
Customer experience
7XWAVE Sample Synth Loop Maker
PhaseII
In-app purchases
7XWAVE Sample Synth Loop Maker
No in-app purchases
PhaseII
No in-app purchases
Questions
Is 7XWAVE Sample Synth Loop Maker free?
Is PhaseII free?
Which has better reviews, 7XWAVE Sample Synth Loop Maker or PhaseII?
Do 7XWAVE Sample Synth Loop Maker or PhaseII have ads?
Which is updated more often, 7XWAVE Sample Synth Loop Maker or PhaseII?
Other comparisons















