Comparison

WoodScaper vs Binarhythmic Rhythm Generator

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

WoodScaper

This app offers a versatile suite of four classic guitar effects: phaser, chorus/flanger, wah-wah, and tremolo. It provides extensive customization options for each effect, allowing for complex sound design and routing possibilities. It functions as both a standalone application and an AUv3 effect.

Highlights
  • Four classic guitar effects: phaser, chorus/flanger, wah-wah, tremolo
  • Advanced LFO modulation with multiple waveforms and sync options
  • Flexible routing: series, parallel, and custom combinations
  • Stereo output from mono input
  • AUv3 and standalone operation
  • MIDI control for major parameters and preset switching
  • iCloud Drive preset storage
Features
Read full description

WoodScaper combines into one unit the 4 classic guitar effects : phaser, chorus/flanger, wah-wah and tremelo. Besides the familiar controls each effect has some extra not-so-commonly-found options. The 4 effects can be routed in series (pedalboard mode), parallel (DAW mode) or some combinations of those modes. Panning or the Stereo control can create stereo sounds from a mono input source. WoodScaper is both stand-alone and an AUv3 effect. - All LFO’s can be set to different waveforms : Sine, Square, Saw Up, Saw Down, Triangle.
 - All LFO frequencies can be set to a bar fraction (1/4, 1/8 , …) of the BPM or can be set free to a specific rate   (independent from the BPM).
 - All LFO phases can be reset with a button.
 - All effects have an On/Off (parallel routing) or On/Bypass (serial routing) switch like on a pedalboard. The switches can  be toggled by Midi CC’s.
 - Phaser has settings for number of poles, frequency range and modulation flavour.
 - Phaser has second LFO to modulate filter Q.
 - Chorus has feedback, HighPass, LowPass and Saturation.
 - Wah-wah control can be LFO, Envelope, Envelope + LFO, side chain, Midi note velocity or Midi CC 1 (mod wheel).
 - Wah Envelope has Attack, Release and Threshold or Sensitivity controls.
 - Wah can go up or down.
 - Wah filter type and Q can be set.
 - Tremolo has 3 types : Amplitude, Ring or Harmonic.
 - Harmonic Tremolo has cross-over frequency control.
 - Tremolo has a Threshold control to have more tremolo when the signal increases.
 - Tremolo has “Biased Tremolo” mode to get more tremolo when the signal decreases.
 - Has a global Input and Output Gain control.
 - Has 2 extra LFO’s to modulate most parameters (rates, depths, …)
 - Modulation LFO’s have their own slew rate control and a random mode.
 - Presets can be stored in iCloud Drive (makes them available on all your devices).
 - Presets can be switched with Midi Program Changes or a Midi CC (up or down)
 - Major controls can be set with Midi CC messages.

About

Binarhythmic Rhythm Generator

This app generates rhythmic MIDI outputs based on binary numbers, allowing for intricate control over note, velocity, and gate length. It offers advanced logic operations and randomization for unique rhythmic patterns. It functions as a standalone app and an AUv3 MIDI plugin.

Highlights
  • Binary-based MIDI sequencing
  • Configurable bit parameters (note, velocity, gate length)
  • Advanced logic operations (AND, OR, XOR)
  • Randomizer for note selection
  • Multiple gate types (Rest, Single, Multiple, Hold)
  • AUv3 MIDI plugin support
  • Standalone app functionality
Features
Read full description

Binarhythmic is a MIDI sequencer that would generate rhythmic outputs based on the binary numbers. The sequencer has a counter, increasing on each sequencer cycle. The binary form of this number, something like "010110011".  Each 0 or 1 is a "Bit", and each bit is a MIDI output. If a bit is 1 then the gate is open for that bit, and if it's 0 then the gate is closed for that bit.  You can use the Multiplier parameter for controlling the sequencer counter.  The rate parameter controls the sequencer speed. Each bit has a note, velocity, gate length, trigger type and logic operation.  You can also vary the velocity and gate length. With the lower amounts of variety, you can humanise the sounds like Hi-Hats.  You can assign different MIDI channels to the bits and control different synths. The gate type is a very important parameter for the rhythm generation. On each sequencer cycle, if the gate is open for a bit; - Rest mode doesn't send the MIDI. - Single mode sends the MIDI once for the first sequencer cycle when the gate is opened. - Multiple mode sends the MIDI on each sequencer cycle while the gate is opened. - Hold mode sends the MIDI when the gate is opened and sustains it until the gate is closed Logic is one of the most powerful features of Binarhythmic. You can create endless rhythmic possibilities by using the logic operations. You can modulate the bits by applying logic operations on them with the other bits. - AND(&) operation opens the gate if the bit's gate is open AND the other bit's gate is open. - OR(+) operation opens the gate if the bit's gate is open OR the other bit's gate is open. - XOR(^) operation opens the gate if the other bit's gate is NOT open. With the randomizer you can randomize the notes on your bits in a range of notes that you can set. Or you can hand-pick the allowed notes from the list. With that feature, you can fully control the randomizer. In the "Random" mode, you can assign the randomization chance of the bits. When select the Random mode, the new Config button on the bottom toolbar appears and you can configure the randomizer. You can also access this configuration menu from the settings menu as well. In the multiple gate type mode, you can set the randomizer behaviour from the settings menu. If you toggle the "Randomize notes on each sequencer cycle" setting, then the randomizer will generate a new note on each sequencer cycle while the gate is open, if the gate type is multiple. Otherwise, it will randomize the note on the first sequencer cycle when the gate is opened and will trigger that note on each sequencer cycle until the gate is closed. Binarhythmic app runs as standalone app as well as AUv3 MIDI Plugin. You can create AU presets and use AU parameters of the AUv3 plugin. You can control or even automate every AU parameter of Binarhythmic.  You can modulate the multiplier parameter with PatternBud. You can also control the key and scale with BrainBud. Binarhythmic is a MIDI app and does not produce any sound on its own. You need to route its MIDI output to an audio app. For using the AUv3 plugin, you need an AUv3 host app such as AUM, Cubasis, Nanostudio, Loopy Pro etc.

Screenshots

WoodScaper2 screens
Binarhythmic Rhythm Generator4 screens

Verdict

The call

The clearest difference is price: WoodScaper at $4.99 against Binarhythmic Rhythm Generator's $5.99. WoodScaper also leads on iOS requirement (9.3 vs 13.0). On rating, review sentiment, ratings volume and update cadence there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

WoodScaper costs $4.99 and Binarhythmic Rhythm Generator $5.99 up front. Neither carries in-app purchases, so what you see is what you pay.

ReceptionRating · Positive reviews · Number of ratings

On the App Store both sit at effectively the same score — 4.9 for WoodScaper against 5.0 for Binarhythmic Rhythm Generator. Both are backed by a comparable volume of ratings — 7 and 5 respectively. Written reviews split almost evenly too, at 100% and 100% positive.

UpkeepUpdate frequency

WoodScaper ships an update every 3 weeks, Binarhythmic Rhythm Generator fortnightly. The most recent releases landed on November 16, 2026 and November 20, 2026 respectively.

Scorecard2 real differences · 8 level
WoodScaper versus Binarhythmic Rhythm Generator: the parameters behind the verdict, then further details
ParameterWoodScaperBinarhythmic Rhythm Generator
Price$4.99 — better$5.99
Rating4.9 (7 ratings)5.0 (5 ratings) — better
Positive reviews100.0% of reviews100.0% of reviews
Number of ratings7 — better5
Update frequencyEvery 3 weeksFortnightly — better
AdsNoNo
In-app purchasesNoNo
MonetizationPaidPaid
DevicesiPhone, iPad, iPodiPhone, iPad, iPod
Requires iOS9.3 — better13.0
Further details — not scored
Size11 MB6 MB
Age rating4+4+
DeveloperWoodman's Immaculate Maple Syrup StudioCem Olcay

Customer experience

WoodScaper

All ratings7 ratings
Positive100.0%
Neutral0.0%
Negative0.0%
Written reviews3 reviews
Positive100.0%
Neutral0.0%
Negative0.0%

Binarhythmic Rhythm Generator

All ratings5 ratings
Positive100.0%
Neutral0.0%
Negative0.0%
Written reviews4 reviews
Positive100.0%
Neutral0.0%
Negative0.0%

In-app purchases

None

WoodScaper

No in-app purchases

None

Binarhythmic Rhythm Generator

No in-app purchases

Questions

Is WoodScaper free?
WoodScaper costs $4.99, with no in-app purchases.
Is Binarhythmic Rhythm Generator free?
Binarhythmic Rhythm Generator costs $5.99, with no in-app purchases.
Which has better reviews, WoodScaper or Binarhythmic Rhythm Generator?
Binarhythmic Rhythm Generator is rated higher. WoodScaper averages 4.9 out of 5 from 7 ratings, while Binarhythmic Rhythm Generator averages 5.0 from 5 ratings.
Do WoodScaper or Binarhythmic Rhythm Generator have ads?
Neither WoodScaper nor Binarhythmic Rhythm Generator shows ads.
Which is updated more often, WoodScaper or Binarhythmic Rhythm Generator?
WoodScaper ships an update every 3 weeks, and Binarhythmic Rhythm Generator fortnightly. Most recently, WoodScaper was updated on November 16, 2026 and Binarhythmic Rhythm Generator on November 20, 2026.

Other comparisons