Audio / Spectrum Analyzer vs Oscilloscope & Spectrogram

This RTA app supports simultaneous display of "Audio Waveform", as well as the FFT-based "Amplitude Spectrum" (frequency magnitude) and "Spectrogram" (frequency distribution over time), for audio signals input from a microphone. (FFT: Fast Fourier Transform, RTA: Real Time Analyzer) [Features] - Supports simultaneous display of Waveform / Spectrum / Spectrogram - Supports orientation both portrait and landscape - FFT size - Window function - Spectrum average - Spectrum Tilt - Frequency weighting (Flat, dBA, dBC) - The type of expressing the frequency of Spectrum / Spectrogram (Linear, Log) - Displays the peak level and its frequency of the spectrum - Peak Hold (displays the results of holding past peak values ​​of the spectrum) - Octave Analysis (displays the spectrum divided into octave bands) - Generates the audio signal (Sine, Triangle, Squire, Saw) - Generates the noise signal (white noise, pink noise) - Pitch meter display The Pro version offers Ad-Free Viewing and High-Resolution Analysis (FFT size: 16384, 32768, Spectrum Average: 4, 8). [Setting items] 1. Screen structure : Select the display screen configuration. View Num : 1, 2 View Type : - 1 screen : Wave (Waveform) / 1D (Spectrum) / 2D (Spectrogram) - 2 screens : W+1D / W+2D / 1D+2D Layout : Vertical / Horizon 2. Frequency Axis Scale Type : Selectable the type of expressing the X direction (frequency) of Spectrum / Spectrogram. - Linear: Distributed at equal intervals - Log: The intervals increase logarithmically 3-1. FFT size : 1024, 2048, 4096, 8192, 16384, 32768 (* 16384, 32768 is available in the Pro version.) 3-2. Window function : Hanning, Hamming, Blackman, No window 4. Spectrum Average Number of spectrum average for a display of spectrum. 1, 2, 4, 8 (init value: 1) (* 4 and 8 are available in the Pro version.) Higher value will make the spectrum less noisy and more smooth, at the cost of lower time resolution. 5. Spectrum Tilt : Compensates the visual slope of the spectrum around a 1 kHz pivot. -6.0 to +6.0 dB/oct in 0.5 dB/oct steps (0 means no tilt). 6. Frequency Weighting : Selectable frequency weighting. - Flat: No frequency weighting is applied. - dB(A): Frequency response that takes into account human hearing. - dB(C): Relatively flat response. 7. Peak Hold : Displays the results of holding the past maximum values ​​(peak values) of the spectrum. 8. Octave Analysis : Displays the results of classifying the spectrum into octave bands. Division method: - FFT: Spectral display - 1/24, 1/12, 1/6, 1/3, 1 octave: Display divided into octave bands Calc method: - Max: Displays the maximum spectrum value in each band - Average: Displays the average spectrum value in each band 9. Generates the audio signal : Set the audio signal to be generated. - There are 4 types of waveform. (Sine, Triangle, Squire, Saw) - It can set the value of the frequency in 20Hz - 20000Hz. 10. Generates the noise signal : Set the noise signal to be generated. - There are 2 types of noise. (White noise, pink noise) [Other] - Background color: Black, White - WaveForm: Line Color (Green, Yellow, Invert), Line Width (1.0 ~ 6.0 px) - Spectrum: Bar color (Green, Yellow, Color patterns) - Spectrogram: Colormap, Display range (-150 ~ -60 dB), Display time (4 ~ 60 sec), Apply Spectrum Tilt - Bluetooth connection policy selection (disabled, HFP, A2DP). - Scaling of Waveform / Spectrum display in the Y direction (magnification: 0.5 - 2.0). - Scaling of Spectrum / Spectrogram display in the X direction (magnification: 1.0 - 16.0).

OSCILLOSCOPE & SPECTROGRAM is a powerful audio analyzer app and audio unit plugin KEY FEATURES - Run as both Audio Unit and standalone app - View up to three seconds of audio on the screen - Pause and scroll horizontally to browse back in time - Pinch to zoom in / zoom out - See both oscilloscope and spectrogram separately or overlayed together - Frequency trigger mode helps identify the precise frequency and MIDI note of sounds in the spectrogram - Stereo and mono views - Level based trigger mode has lookahead, pause, and zoom - XY mode shows stereo correlation - Automatically adjusts FFT size to fit zoom setting - Bark-frequency scale spectrogram shows nice detail at low and high frequencies - When zoomed in, the oscilloscope uses sinc upsampling to show you a close approximation of what actually outputs from your audio interface after digital to analog conversion, rather than just displaying raw audio samples. WHAT DOES THIS APP DO THAT OTHERS DO NOT? 1. Pause Button We can't emphasize enough how useful this is. You never have to worry about trying to catch short events that disappear quickly because you can watch the sounds go by slowly at a 3 second viewer scale, then just pause and scroll back if you missed something. When you get to the event you want to see you can pinch to zoom in right down to sub-sample level of detail, then zoom back out when you are done and zoom in on something else. This feature alone makes almost all other oscilloscope apps unnecessary because it means you can easily see ANYTHING that you need to see. 2. Frequency Identification Mode In frequency mode, when you touch the frequency scale on the right of the screen a blue line appears on the spectrogram. When you position the line above a specific frequency on the spectrogram, a panel on the left side of the screen displays the octave, note name, and MIDI number. You can then use the frequency timing oscilloscope to lock in on the exact pitch in cents so that you not only know which MIDI note that sound corresponds to but you know exactly how many cents sharp or flat. The ability to simultaneously see the frequency on the spectrogram and confirm it with precision on the oscilloscope allows you to quickly and easily identify musical pitches to a level of accuracy that have not seen anywhere else, not even in desktop software. 3. Trigger with Lookahead Almost every oscilloscope has a feature where it re-draws the screen each time the input signal level crosses a specified threshold. This is the main and most basic function of any oscilloscope. However, when setting the trigger at a high level to view the attack section of musical notes or drums, we miss the first part of the note. By using lookahead, this app allows you to see a few milliseconds BEFORE the trigger point so that you can see the whole sound you want to examine. 4. Carefully Designed Spectrogram In all spectrum analyzer displays, the upper end of the frequency scale is crowded, meaning that a single pixel corresponds to 10 or 20 frequencies in the frequency analysis. In many other analyzer apps one of two things occur: either 9 out of 10 frequencies in that upper range simply get ignored and disappear from the spectrogram display, or all 10 frequencies combine together to make the pixels in the upper range appear brighter than low frequency sounds of similar volume. This may seem like a technicality until you run a sine sweep or a 20 KHz tone through the analyzer and find that large sections of the input simply aren't displayed on the analyzer screen. Looking at these kinds of test signals on a spectrogram is the primary way that we test and evaluate the quality of audio effect plugins. If a spectrogram is to be of any real use as an analysis tool, it should do this right. Other spectrograms often mess up the lower frequencies too, either by making them take up too much space or by making them very pixelated. This spectrogram carefully avoids these problems.