Caravan Leveler vs CEAR

Stop running in and out of the door to check the level. Caravan Leveler turns your iPhone into a levelling sensor that tells you exactly what to do: which side to raise, which end, and by how many centimetres — then lets you read it from wherever you are standing. KNOW EXACTLY WHAT TO RAISE - Front and side silhouettes of your vehicle tilt in real time, with the angle to a tenth of a degree - Plain instructions: "Raise the right side ≈ 6.3 cm", then "Raise the front ≈ 2.4 cm" - Side to side first, then front to back — the order that actually works MADE FOR CARAVANS AND MOTORHOMES - Caravan: wind the jockey wheel up or down and chock a side — the app says which way and how far - Motorhome and autocamper: it knows you can only drive onto ramps, so it only ever asks you to raise, and names the wheels - If the ground is too steep for any ramp, it says so instead of quoting a number no ramp can reach - Air suspension? It reminds you to let it settle before you trust the reading SEE THE MOMENT YOU'RE LEVEL - Silhouettes, spirit-level bubble and readout all turn green when you get there - Choose the silhouettes, the bubble, or both on one screen - Drive-on guidance beeps faster as you approach level and chimes when you arrive, so your eyes can stay on the ramps. It ducks your music or radio instead of stopping it READ IT FROM OUTSIDE - Leave the sensor iPhone inside, flat on the floor or a worktop - A second iPhone or iPad connects directly and shows the live level — no Wi-Fi, no internet, no account - Or check it on your Apple Watch while you wind the steadies - Your vehicle type and display choice follow along to every device automatically - Streaming from the sensor iPhone to a Watch or second device comes with a Week Pass, Season Pass or Annual Premium, after a 24-hour trial. Levelling on the iPhone itself, and the display device, are always included MEASURE ONCE, RAISE EXACTLY - Two quick tape-measure readings — between the wheels, and from the wheel to the front support or across the wheelbase — turn degrees into centimetres - A visual guide shows exactly where to hold the tape CALIBRATE ON ANY SURFACE - If the surface under your iPhone isn't quite parallel to the chassis, level the vehicle once and hold to calibrate - Reset it with a tap whenever you move the phone AND A FEW MORE THINGS - Sun direction: see where the sun is relative to your vehicle, and park for shade or solar - Siri and Shortcuts: switch vehicle type, turn drive-on guidance on or off, change mode and calibrate by voice - In English, Danish, German, Dutch, Norwegian and Swedish Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

CEAR is the mobile application for monitoring of electrical distribution, transformation, and elevation cabinets produced by Costruzioni Elettroniche CEAR s.r.l. Monitor your electrical systems wherever you are, receiving immediate notifications on critical alarms and operational warnings. View the complete status of your cabinets and analyze historical data for effective operational management. **MAIN FEATURES** - Real-time monitoring of all electrical cabinets with automatic updates - Immediate push notifications for critical alarms, operational warnings, and system information - Interactive synoptic view with complete graphical representation of the plant - Time-based charts for analysis of voltages, currents, powers, and temperatures - Historical data queryable with advanced filters for cabinets, nodes, and time intervals