Caravan Leveler vs Patch List Calculator

Stop running in and out of the door to check the level. Caravan Leveler turns your iPhone into a levelling sensor that tells you exactly what to do: which side to raise, which end, and by how many centimetres — then lets you read it from wherever you are standing. KNOW EXACTLY WHAT TO RAISE - Front and side silhouettes of your vehicle tilt in real time, with the angle to a tenth of a degree - Plain instructions: "Raise the right side ≈ 6.3 cm", then "Raise the front ≈ 2.4 cm" - Side to side first, then front to back — the order that actually works MADE FOR CARAVANS AND MOTORHOMES - Caravan: wind the jockey wheel up or down and chock a side — the app says which way and how far - Motorhome and autocamper: it knows you can only drive onto ramps, so it only ever asks you to raise, and names the wheels - If the ground is too steep for any ramp, it says so instead of quoting a number no ramp can reach - Air suspension? It reminds you to let it settle before you trust the reading SEE THE MOMENT YOU'RE LEVEL - Silhouettes, spirit-level bubble and readout all turn green when you get there - Choose the silhouettes, the bubble, or both on one screen - Drive-on guidance beeps faster as you approach level and chimes when you arrive, so your eyes can stay on the ramps. It ducks your music or radio instead of stopping it READ IT FROM OUTSIDE - Leave the sensor iPhone inside, flat on the floor or a worktop - A second iPhone or iPad connects directly and shows the live level — no Wi-Fi, no internet, no account - Or check it on your Apple Watch while you wind the steadies - Your vehicle type and display choice follow along to every device automatically MEASURE ONCE, RAISE EXACTLY - Two quick tape-measure readings — between the wheels, and from the wheel to the front support or across the wheelbase — turn degrees into centimetres - A visual guide shows exactly where to hold the tape CALIBRATE ON ANY SURFACE - If the surface under your iPhone isn't quite parallel to the chassis, level the vehicle once and hold to calibrate - Reset it with a tap whenever you move the phone AND A FEW MORE THINGS - Sun direction: see where the sun is relative to your vehicle, and park for shade or solar - Siri and Shortcuts: switch vehicle type, turn drive-on guidance on or off, change mode and calibrate by voice - In English, Danish, German, Dutch, Norwegian and Swedish Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

Patch List Calculator (PLC) is a professional tool built by a lighting technician for industry experts. Forget about manual address calculations on paper or returning to your laptop just to check CAD details. PLC is your mobile assistant during prep and setup. Features designed to speed up and simplify your workflow: 1. VISUAL DMX MAP -Clear universe overview in a 16x32 grid (512 channels). -Instant patching and real-time conflict control. -Intuitive drag & drop functionality and color-coded fixture types. 2. MVR AND GDTF STANDARDS -Direct project import from Vectorworks, Capture, Wysiwyg, and grandMA3 via MVR files. -Full GDTF support – the app automatically analyzes the fixture structure and its footprint (DMX channel count). -Support for complex devices: multi-break, sub-heads, and advanced DMX modes. 3. INTERACTIVE 2D PLOT -Visualize fixture placement in X, Y, and Z axes. -Z Filter (Height): Isolate specific trusses or structures to focus only on the section currently being rigged. -Measurement Tools: Check distances between fixtures directly on the plot (linear and point-to-point) with a snap-to-fixture (magnet) feature. 4. MANAGEMENT AND MORPHING -Batch editing: Quickly change addresses, ID numbers (FID), or fixture types for entire groups. -Multi-universe support with smooth and fluid navigation. 5. TECHNICIAN’S TOOLBOX -Checklist: Physically check off each rigged and addressed fixture to ensure everything is ready. -DIP Switch Calculator: Essential for older fixtures still working on stages. -Database Sync: Connect your own fixture list via URL (manufacturer, model, modes, DMX footprint). The app requires no login and is completely ad-free. Once MVR files and the database are imported, the tool works fully offline, which is crucial in concert and festival environments. This is a pure technical tool created for one purpose: to eliminate patching errors and maximize your workflow speed. Install Patch List Calculator and take full control of your patch.