Gateway V1 vs KGateway

The app enables easy access to your IDS Core "Gateway V1" device to make settings and operation of connected Smart Home devices, devices with "Tasmota" SW can also be controlled. The "Gateway V1" / "Tasmota" devices are automatically found in the local network and the following functions are then available: - Make local settings (time, language, WiFi ...) - Integration of new compatible smart home devices (switch sockets / sensors) - Switching of taught-in devices (e.g. switch sockets / via IR commands to TV, AV devices) - Consumption / energy display of compatible devices (switch sockets) - Establish routines - Timer (single, weekdays, sunrise and sunset, temperature, humidity,  random) - Radio 433MHz / 866MHz, infrared, WiFi devices can be linked together e.g. - Radio switches switch radio sockets, WiFi sockets and / or  send IR commands to the TV / AV receiver - IR remote control switches radio-controlled socket, WiFi socket - The timer switches the outdoor lighting on at sunset / off  again at sunrise Requirement: IDS Core Gateway V1 - SW V1.0.16 or higher Tasmota - SW 6.6.0 or higher

KGateway is a configuration app, through which you can configure the BLE/Wi-Fi gateway launched by KKM. This app supports configuration of the following parameters: 1. Wi-Fi connection information. 2. BLE scan parameters, filter parameters. 3. HTTP or MQTT server information connected by the gateway. After provision by the app, the gateway(BLE/Wi-Fi) can connect the BLE Beacon/Sensor devices, and can report the sensor data from Beacon/Sensor devices to the cloud. Why does this app need location permission? Because the app needs to scan the SSID information of the KGateway when configuring the KGateway for the first time, and the location permission is required for IOS to scan the Wi-Fi SSID information. Why does this app use the HTTP not HTTPs protocol? This app only uses HTTP protocol to connect to the KGatway(WiFI-BLE gateway) for provision. Because the KGateway's internal resources are limited, the device only supports the HTTP protocol. In addition, because the app will only perform provisioning when the KGateway is used for the first time, and the app and the KGateway device must be under the same Wi-Fi router during provisioning, the security risk of using the HTTP protocol for Provisioning is controllable.