Gira Keyless In vs BRUNNER EAS3

Open doors without ever needing a key. With Gira access control, you can open doors without needing a key. Gira Keyless In products enable hassle-free building access using technology based on a secure electronic system. The Gira System 106 fingerprint module can be operated in the following configurations: As part of a Gira door communication system • In combination with a Gira System 106 door station forming part of a Gira door communication system, • Independently of the door station, • As a stand-alone device within the Gira door communication system. Without a Gira door communication system: • As a stand-alone device with a separate actuator, which is located in a safe place inside the building. You can work through the start-up wizard and manage your Gira System 106 Keyless In products using the app. App functions: • Secure, encrypted Bluetooth communication between the Gira System 106 Keyless In module and the authorised smartphone • Initial start-up wizard • Manage users and devices: Name users, groups and devices, Set device parameters (volume and lighting), Support for the creation, amendment or deletion of users and fingerprints, Create, amend or delete time-restricted authorisations (By day or by week, Optional start or end date, Several time intervals possible) • Transfer settings: Export, share and Import device and/or user data • See when new firmware versions become available and easily carry out updates from the authorised smartphone • Option to store the electrician’s contact details To be able to use all the functions of the app, you must have at least a Gira System 106 Keyless In module, a power supply, a Gira DCS switching actuator and a door that has been made functionally compatible or a gate with an E-opener or motor control.

EAS 3: Electronic combustion control goes digital The new EAS 3 can now also be operated with integrated WLAN via an app. The new EAS 3 is available in two versions. Both variants include wireless access via WLAN. In the familiar design with a glass plate and user interface, the control can be operated via app in addition to the already familiar handling. In the reduced form with an invisible, digital control unit and no display, only access via WLAN and app is provided. The app works on the smartphone in the same way as on the tablet, is free and is intended for access within the reception area of the local home network. Of course, when installing the EAS 3 without a display, make sure that the installation location is within the reception area of the corresponding WLAN router. So that both operation and parameterization are guaranteed. Start at the push of a button The initial commissioning, i.e. the configuration of the heating insert and additional functions, is easily controlled via the app with the EAS 3 without a display. There is a button installed on the control board that starts the connection to the existing internet access. Feedback is provided via an LED status display. In detail it works like this: The EAS 3 is set up as an access point at the factory. The app connects to the controller for the first time, identifies the local WLAN and passes on the access data to the EAS 3. With this information, the EAS 3 automatically switches to the local WLAN and the WLAN symbol is shown in the display variant. Configuration and operation are now possible via the app. Protected tradesman access for the stove-maker specialist company The buttons and setting options familiar from the EAS display version are also available on the app. The burn counter, the operating hours, operating instructions or error displays and the current burn as a temperature curve can be seen at a glance, which makes the app particularly clear. As usual, protected access is available for specialist tradesmen. The heating insert is set here and the known parameter levels are made accessible. Optimized heating behavior BRUNNER controls like the EAS 3 not only control the combustion air supply, which is crucial for optimal combustion. They also recognize typical heating errors such as too little, damp or unsuitable firewood and provide the user with appropriate operating instructions. What is new is the information about the perfect refill time. If it is chosen correctly, the wood ignites itself using the existing embers. Parameters are stored for each heating insert that define the start and end of the perfect re-fueling period. A small flag above the burn curve marks the point at which refills can be made. The second flag is displayed when refilling requires re-heating. A notice: Access to the EAS 3 control via app is only possible in the local reception area of the house network. Remote access via the Internet is not intended for the EAS 3!