Comparison

P/T Manager vs CaptiveAire Toolbox

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

P/T Manager

Features
Read full description

The new Pressure and Time app is an essential management tool to have for any non-renewable gas resource. Pressure, bars, hectopascals and other metrics used to measure pressure all require additional calculations in the operational use of any gas. Time is a universal metric understood by virtually anyone in the world and does not require translation or conversion to understand quantity and consumption. Cylinder size, Flow rate and pressure quantity amount (PSI, BARA, KPA, etc) are all that are needed to arrive at a duration (time remaining). The Pressure and Time app will count down numerically in hours, minutes and seconds. An outside color ring is also another indication of time remaining. If the ring is Green there is more than :45 minutes of the gas remaining. If the ring is yellow then there is less than :45 minutes of gas remaining and if the ring is red there is less than :15 minutes of gas remaining. The Pressure and Time app is currently designed for oxygen cylinders whose normal oxygen capacity is 1850 psi when full, but the user can enter as high as 2000 psi for gas expansion. Additional gases will be added in the future. If you have a specific gas you would like to have available please contact us at www.adsopp.com. The Pressure in Time (P/T) Manager comes with a 30 day free trial period where the user can cancel at any time by deselecting the buy option (or whatever you are using to turn the subscription on/off) anytime before the end of the 29th day. After this you will be charged $3.99 USD for a one year (365 day) subscription. The subscription will end at midnight on the 365th day after the day of purchase. • Auto-renewable subscription- The subscription will renew itself automatically at the end of the 365 day period unless the auto-renew option is turned off as described below. • 30 day - Free trial period, no obligation and can cancel anytime during that period. After 30 days the user will get charged $3.99 for an annual subscription. • Your subscription will be charged to your iTunes account at confirmation of purchase and will automatically renew itself at the end of 365 days unless auto-renew is turned off at least 24 hours before the end of the current period. • Current subscription may not be cancelled during the active subscription period; however, you can manage your subscription and/or turn off auto-renewal by visiting your iTunes Account Settings after purchase. • Privacy policy:https://adsopp.com/eops/terms

About

CaptiveAire Toolbox

This app provides over 40 HVAC and building-systems engineering calculators for field use. It covers cooling, heating, ventilation, electrical sizing, piping, and valve sizing, referencing standard industry formulas. Access detailed formula definitions and weather data for quick calculations.

Highlights
  • 40+ HVAC engineering calculators
  • Cooling and heating load calculations
  • Ventilation and airflow analysis
  • Electrical and piping sizing
  • Valve and flow rate calculations
  • Industry-standard formula references
  • Interactive psychrometric chart
Features
Read full description

The CaptiveAire Toolbox puts 40+ HVAC and building-systems engineering calculators in your pocket. Designed for engineers, contractors, and technicians, every formula uses standard industry references (ASHRAE, AMCA, NEC), sized so you can run sanity checks in the field instead of pulling out a laptop. Cooling: Total Cooling Load (enthalpy-based with humidity), Sensible Cooling Load, Latent Cooling Load, SEER, Cost of Cooling, Tons to BTU/hr conversions, DX/MPU Cooling, Evaporative Cooling, DMUA mode logic, Cooling Density Factor. Heating: BTU output for direct and indirect fired heaters, Input and Output BTU/hr for IBT systems, Temperature Rise from BTU and CFM, Heat Pump capacity with airflow and outdoor temperature adjustment, Reheat Coil leaving conditions, Manifold Pressure for natural gas and LP, Heating Density Factor. Ventilation and Airflow: Room Volume CFM, Sensible Heat CFM, Cooling Load CFM, Duct Velocity CFM, Outdoor Air Load (sensible plus latent), Psychrometric properties from dry bulb plus RH or wet bulb, Fan Energy Index per AMCA 208, Motor Adjusted Frequency for VFDs, ERV ROI Calculator with degree-day economics. Electrical Sizing: Wire Size per NEC Table, MCA and MOCP for motor circuits, Amperage from horsepower. Piping and Structural: Round Duct Sizing using Darcy-Weisbach and Colebrook-White, Duct Velocity and Friction, Piping Pressure Drop with fittings equivalent length, Pitched Roof curb height variation. Valve and Flow Sizing: Kv from flow rate, flow rate from Kv, pressure drop from Kv, Cv to Kv conversion, Heat Load to Flow Rate for water and glycol. Reference: ASHRAE Weather Station data with autocomplete address search, returning heating and cooling design temperatures, solar irradiance, wind speeds, and monthly design-day temperatures. Interactive Psychrometric Chart with property calculations. Modern HVAC versus Traditional Rooftop Unit comparison. Each calculator includes the formula and variable definitions accessible from the title bar. Tap the info icon to see exactly what equation drives the result. Built by the engineering team at CaptiveAire Systems. No tracking, no ads, no account required.

Screenshots

P/T Manager3 screens
CaptiveAire Toolbox4 screens

Verdict

The call

The clearest difference is in-app purchases: CaptiveAire Toolbox at none against P/T Manager's 1. CaptiveAire Toolbox also leads on update cadence (weekly vs every 4 months). On price, ads, device support and iOS requirement there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ad data · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ad data · Monetization

Both are free to download. P/T Manager sells 1 in-app purchase, starting at $3.99 per year. CaptiveAire Toolbox asks for nothing beyond the download.

UpkeepUpdate frequency

P/T Manager ships an update every 4 months, CaptiveAire Toolbox weekly. The most recent releases landed on November 7, 2026 and November 18, 2026 respectively.

Scorecard2 real differences · 7 level
P/T Manager versus CaptiveAire Toolbox: the parameters behind the verdict, then further details
ParameterP/T ManagerCaptiveAire Toolbox
PriceFreeFree
Rating—5.0 (1 ratings) — better
Number of ratings—1 — better
Update frequencyEvery 4 monthsWeekly — better
Ad dataNoNo
In-app purchasesYesNo — better
Monetization—Free
DevicesiPhone, iPad, iPod — betteriPhone, iPad
Requires iOS15.0 — better16.0
Further details — not scored
Size1 MB71 MB
Age rating4+4+
DeveloperAeronautical Data Systems Inc.CaptiveAire Systems, Inc.

In-app purchases

1 purchases

P/T Manager

Subscriptions1
  • Free 30 days trial1 Month trial$3.991 Year
None

CaptiveAire Toolbox

No in-app purchases

Questions

Is P/T Manager free?
P/T Manager is free to download, with in-app purchases available.
Is CaptiveAire Toolbox free?
CaptiveAire Toolbox is free to download, with no in-app purchases.
Do P/T Manager or CaptiveAire Toolbox have ads?
Neither P/T Manager nor CaptiveAire Toolbox lists data used for advertising in its App Store privacy details.
Which is updated more often, P/T Manager or CaptiveAire Toolbox?
P/T Manager ships an update every 4 months, and CaptiveAire Toolbox weekly. Most recently, P/T Manager was updated on November 7, 2026 and CaptiveAire Toolbox on November 18, 2026.

Other comparisons