Fluence Wireless Flex vs LUXOMESH Commissioning

Configure Fluence's Wireless Flex Dimming hardware to support wireless lighting control in greenhouses, indoor farms, and other horticulture applications. Wireless Flex Dimming is fully compatible with any climate management system with a 0-10V output for lighting control, so it can be used with a variety of best-in-class solutions that match the grower’s needs and preferences, now and in the future. Fluence’s Wireless Flex Dimming delivers simplicity, flexibility, and cost savings to your horticulture lighting operation. Wireless Flex Dimming total installed cost is typically significantly lower than a 0-10V wired configuration, realizing significant savings from reduced installation time and eliminating potential wiring errors. Simply plug a Wireless Flex Dimming Receiver into the dimming port of each Fluence light fixture, install a Wireless Flex Dimming 0-10V Adapter, and connect the 0-10V dimming control output from the climate computer or scheduler. An optional wireless wall station can be added for emergency shut-off and local control.

In modern times commissioning a lighting control solution do not need to be time consuming and complicated anymore. To support you in saving time and energy, B.E.G. provides a set of tools for commissioning and monitoring qualified Bluetooth mesh lighting control devices. Using our intuitive web and mobile apps In the web app, most of the commissioning work can be done from anywhere in the world. By creating zones directly on your floorplan and using the predefined, customizable scenario profiles your configuration is done in no time. Complete the commissioning process on-site with the use of our app. It allows you to add B.E.G. Bluetooth mesh lighting control devices to a wireless network in no time. Its intuitive interface was designed to require as little work on your side as possible. Provisioning Thanks to proximity sensing, the app provides you with a list of detected LUXOMESH devices. Provision up to 5 devices at once. Using a RSSI filter, you can narrow down the list of visible devices to those that are the nearest. Customization If necessary, you can customize the previously selected scenario to your needs. Personalize follow up time, orientation light plus other lighting control parameters. If the requirements change it`s easy to adjust. Calibration Calibrate a light sensor in accordance with the measure provided by a light meter. Adjust brightness until it reaches the desirable level and enter the value. Test Test the performance of lighting control as well as the defined lighting scenes and make adjustments if needed.