Comparison

Smart Install vs XPipe

Price, ratings, monetisation and update history for both apps, side by side β€” with what reviewers say about each.

Head to head
About

Smart Install

Features
Read full description

The application allows you to set the desired mode of operation on electric heaters with NFC programmers. To do this, you need to set the necessary settings in the application, click on the "Save to panel" button and raise the NFC antenna to the mark on the heater sticker, and to set the manual heater control or change the operating mode, just select the appropriate button on the main screen. You can easily create and store your own temperature modes in your smartphone, which will provide comfort in the room and save you money, because reducing the heating temperature by 1 Β° C saves up to 6% of electricity The ability to control the surface temperature of the electric heater from 40 Β° C to 95 Β° C allows you to safely use such devices in children's rooms, but keep in mind that if you reduce this setting below 85 Β° C, the heat output will also decrease! Locking the manual heater control buttons will not allow accidental pressing to change the set operating parameters. In order not to set the required timer of the towel dryer mode every time (1 hour by default), set the starting value and each time you set this mode it will start for the required number of hours (from 1 hour to 6 hours). The safety control system of such electric heaters will warn you in time with an audible signal that the operating parameters are out of range (someone accidentally covered the heater, which can lead to overheating) and turn it off. If the fault is not critical (your pet has damaged the indoor air temperature sensor, and this happens), emergency modes will be activated, this will prevent it from freezing until you contact customer service. Smart-install - technologies that work for your comfort and safety!

About

XPipe

This app provides a comprehensive suite of calculators and tools for pipe fitting professionals. It offers detailed calculations for offsets, bends, and layouts, along with isometric drawing capabilities and laser measurement integration. All features are available offline, supporting various international standards.

Highlights
  • 35 pipe fitter calculators
  • Rolling offsets and cut lengths
  • Piping isometric drawings with 3D view
  • Laser measurement integration
  • DXF output for cutting tables
  • ASME and ISO standards library
  • Welder qualification tracking
Features
Read full description

Rolling offsets, travel and cut lengths in inches and fractions β€” with a scale drawing for every answer. 35 pipefitter calculators, piping isometrics and ASME standards, all offline. 35 CALCULATORS Offsets and rolling offsets, half elbows and turned elbows, elbows at any angle, miter bends, square and eccentric branches, elbow supports, cone and square-to-round layouts, pipe banks, dished heads, fillet welds, reducers, purge gas, slope, pipe weight, pressure test, thermal expansion and more. Pick a calculation by what you know. HOW TO WORK OUT OFFSETS A step-by-step guide with drawings and the sum under every step: offset, rolling offset, cut length, half elbow from a 90Β° and the insert. PIPING ISOMETRICS Draw the line the way you run it: direction, length, next direction. Elbows and tees place themselves. Valves, flanges, reducers, supports and symbols from the standards library, turned around the pipe. Slope, field welds, photos and videos, a 3D view. Bill of materials, cut list, weld log, a Letter or 11Γ—17 PDF sheet (A4 and A3 too), PCF and 3D DXF, a link for another fitter. LASER MEASUREMENT A cross-line laser takes the position of two pipes and the app suggests the connection, with elbows and cut lengths, in 2D and 3D. Open it as an isometric or add it to an existing one. A Bluetooth distance meter puts its reading straight into the run length, and a run measured on site is marked as measured. FROM SCREEN TO PLATE Cone, transition, branch and miter layouts at 1:1: DXF for the cutting table, or Letter sheets with a check ruler. STANDARDS LIBRARY 98 ASME, ISO, DIN, PN-EN and SMS standards, searched by size alone, plus 239 drawing symbols. An old standard leads to the one that replaced it. WELDER QUALIFICATIONS AND PWHT ISO 9606-1 and ASME IX certificates with the range worked out, dates, reminders and a photo. Post-weld heat treatment to ASME B31.3. WORKSHOP Favorite calculators on the home screen, a scientific calculator with a dated history, a spirit level, jobs with a PDF summary and one backup file. ON IPHONE AND WATCH Apple Watch with measurements and offsets, Siri works out an offset, tools on the Lock Screen and in Control Center. A measurement link opens without installing the app, and a label with a QR code prints on a Niimbot printer. An isometric can be read off a CAD PDF. NO ADS. NO TRACKING. NO ACCOUNT. Everything works offline. Inches with fractions to 1/64, or millimeters, units and standards by country, 29 languages. iPhone, iPad and Apple Watch. XPipe Pro is a calculation aid, not a substitute for judgement or for the standards an installation is built to. Always check the result on the material.

Screenshots

Smart Install3 screens
XPipe4 screens

Verdict

The call

The clearest difference is price: Smart Install at Free against XPipe's $19.99. Smart Install also leads on iOS requirement (11.0 vs 17.0). On ads, in-app purchases and device support there is nothing between them.

Scored on Price Β· Rating Β· Positive reviews Β· Number of ratings Β· Update frequency Β· Ads Β· In-app purchases Β· Monetization Β· Best chart rank Β· Devices Β· Requires iOS

CostPrice Β· In-app purchases Β· Ads Β· Monetization

Smart Install is free to download; XPipe costs $19.99 up front. Neither carries in-app purchases, so what you see is what you pay.

Scorecard2 real differences Β· 6 level
Smart Install versus XPipe: the parameters behind the verdict, then further details
ParameterSmart InstallXPipe
PriceFree β€” better$19.99
Positive reviewsβ€”100.0% of reviews
Update frequencyβ€”Daily
AdsNoNo
In-app purchasesNoNo
Monetizationβ€”Paid
DevicesiPhone, iPad, iPodiPhone, iPad, Apple Watch
Requires iOS11.0 β€” better17.0
Further details β€” not scored
Size57 MB43 MB
Age rating17+4+
DeveloperPetro GordiievychJakub Trytek

In-app purchases

None

Smart Install

No in-app purchases

None

XPipe

No in-app purchases

Questions

Is Smart Install free?
Smart Install is free to download, with no in-app purchases.
Is XPipe free?
XPipe costs $19.99, with no in-app purchases.
Do Smart Install or XPipe have ads?
Neither Smart Install nor XPipe shows ads.

Other comparisons