Comparison

Ford PATS Incode Calculator vs BimmerManager

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

Ford PATS Incode Calculator

This utility generates Incode security codes required for vehicle programming procedures. It supports specific Ford, Mazda, Jaguar, and other compatible models manufactured until May 2010. An internet connection is necessary for code generation.

Highlights
  • Incode by Outcode generator
  • Key programming support
  • Control unit replacement support
  • Supports models until May 2010
  • Works with specific Ford, Mazda, Jaguar models
  • Internet connection required
Features
Read full description

Calculate the Incode by enter Outcode from diagnostic tool. Incode is required for performing key programming, control unit replacement and other procedures. ATTENTION: The number of generated incodes is limited. When you purchase the app you get 5 TOKENS, which gives you the opportunity to generate 5 Incodes. After the limit is exhausted, you can buy the required number of tokens. App works with models till May 2010 which has single (starts with 0040) or double outcode (starts with 0044). App DOESN'T work with outcodes starts with 01, 02, 10, 20, 30, 40, 50, 60, 70! Internet connection required for code calculations. Ford Fiesta Outcode: 84C591 Incode: AD59 Mazda RX-8 Outcode PCM: 4530D8 Incode: 517C Jaguar use first 6 digit only. Outcode: 05500652 -> 055006 Incode: 3EAA Supported model list (work till 05/2010): Ford Focus, C-MAX, S-MAX, Fusion, Mondeo, Kuga, Galaxy, Transit, Tourneo Conect, Ka, Fiesta, Taurus, Crown Victoria, Thunderbird, ZX2, Mustang, GT, Edge, Escape, Explorer, Expedition, Ranger, Super Duty, Freestar; Mazda 2/Demio, Mazda3/Axela, Mazda5/Premacy, Mazda6/Atenza, Mazda8/MPV, CX-7, CX-9, Biante, Carol, AZ-Wagon, AZ-Offroad, Spiano/Scrum Vagon, Verisa, MX-5, Biante, Tribute; Mercury Grand Marquis, Mariner, Sable, Milan, Mountaineer, Marauder, Montego, Monterey; Lincoln Zephyr/MKZ, LS, Town Car, MKS, Aviator, Mark LT, MKT, Navigator, MKX, Blackwood; Land Rover Discovery, Range Rover Defender, Freelander, Range Rover Sport;\n\nJaguar X-Type, XK/XKR, S-Type, XF/XFR, XJ8/XJR;

About

BimmerManager

Access BMW diagnostics, factory build data, and service history tools from your iPhone or iPad. Understand fault codes with detailed procedures and manage your vehicle's service history entries.

Highlights
  • Read vehicle diagnostics and fault codes
  • Understand fault code meanings and procedures
  • Manage and write service history entries
  • Decode factory build data and options
  • View headunit information
  • Demo mode for trial
Read full description

Everything your Bimmer needs, from your iPhone/iPad. Most people only find out what's wrong with their BMW when a dealer tells them, after paying a diagnostic fee. BimmerManager puts the same diagnostics, factory build data, and service history tools in your pocket, connected straight to your car over ENET. ======================== Read Vehicle Diagnostics ======================== Scan every control module on your F-Series BMW for stored fault codes in one pass. Don't just see a code, understand it. Tap any fault for a step-by-step service procedure covering what it means, the conditions that triggered it, its real-world impact, and any warnings before you act. Clear a single module or the whole car in one tap. ======================== Service History ======================== Build entries with everything your headunit expects: date, mileage, dealer type and ID, status, and individual jobs, then write them over ENET. NBT, NBT_EVO, EntryNav, and EntryNav2 are fully supported; other headunits can still be attempted, with a clear warning so you know before you commit. Updating 3 entries or fewer lets you choose to erase existing history or append it in ascending mileage order, keeping the timeline intact. Prefer to work offline? Save local backups, reload them anytime, and edit them in backup edit mode with no car connection needed. ======================== Condition Based Service (CBS) ======================== See what your car thinks is due. Read every CBS item from your cluster, engine and DSC modules, each with its remaining distance or due date and a bar showing life left. Did the work yourself? Reset any service in one tap, set the next inspection and emissions test dates, or reset your oil interval. Blocked resets tell you why, linked services warn you about reset order, and CBS data the cluster reports as manipulated is flagged, a handy check before buying a used car. ======================== Offline Tools ======================== No car, adapter or connection needed. Look up any fault code by number, description or module and get the same service procedure as a live scan. Edit saved service history backups and save a new copy to write next time you connect. Demo Mode walks you through the full service history workflow before you buy an adapter. ======================== Decode Your Factory Equipment ======================== Every F-Series BMW left the factory with a hidden build sheet. BimmerManager reads it: type key, build date, paint code, upholstery code, and the full list of factory-installed options, decoded from raw SA codes into names you can actually read. ======================== Know Your Headunit ======================== One screen tells you what you're working with: headunit type, software version, firmware release, map version, and country code. On NBT_EVO, BimmerManager also flags whether your software version supports Apple CarPlay fullscreen. ======================== Built-In Support ======================== Stuck? Submit a support request with your diagnostic logs and relevant backup files attached, right from the app, reliable no matter how you're connected, so we can investigate connection, upload, or backup issues fast. ======================== Requirements ======================== • Vehicles: compatible BMW, MINI, Rolls-Royce, and Toyota Supra models (Diagnostics and Vehicle Equipment currently support vehicles with ENET protocol) • Adapters: MHD / ENET Adapter (other Wi-Fi ENET-style adapters may work, but developer support is limited) • Supported Service History Headunits: NBT, NBT_EVO, and EntryNav officially supported for Service History; other headunits may be attempted at your own risk • Connection: vehicle must support the required ENET communication path, stable voltage recommended, ignition or accessory mode expected

Screenshots

Ford PATS Incode Calculator4 screens
BimmerManager4 screens

Verdict

The call

The clearest difference is review sentiment: BimmerManager at 100% against Ford PATS Incode Calculator's 23%. BimmerManager also leads on in-app purchases (none vs 3) and update cadence (every 3 weeks vs every 5 months). Ford PATS Incode Calculator's advantage is price ($1.99 vs $39.99) and iOS requirement (13.0 vs 16.6). On ads and device support there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ad data · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ad data · Monetization

Ford PATS Incode Calculator costs $1.99 and BimmerManager $39.99 up front. Ford PATS Incode Calculator sells 3 one-off in-app purchases. BimmerManager asks for nothing beyond the download.

UpkeepUpdate frequency

Ford PATS Incode Calculator ships an update every 5 months, BimmerManager every 3 weeks. The most recent releases landed on November 21, 2026 and November 22, 2026 respectively.

Scorecard6 real differences · 4 level
Ford PATS Incode Calculator versus BimmerManager: the parameters behind the verdict, then further details
ParameterFord PATS Incode CalculatorBimmerManager
Price$1.99 — better$39.99
Rating2.7 (30 ratings) — better—
Positive reviews22.8% of reviews100.0% of reviews — better
Number of ratings30 — better—
Update frequencyEvery 5 monthsEvery 3 weeks — better
Ad dataNoNo
In-app purchasesYesNo — better
MonetizationFree with in-app purchases — betterPaid
DevicesiPhone, iPad, iPod — betteriPhone, iPad
Requires iOS13.0 — better16.6
Further details — not scored
Size53 MB388 MB
Age rating4+4+
DeveloperAleksandr RomanchevArtur Dworaczek

Customer experience

Ford PATS Incode Calculator

All ratings29 ratings
Positive37.9%
Neutral10.3%
Negative51.7%
Written reviews57 reviews
Positive22.8%
Neutral1.8%
Negative75.4%

BimmerManager

Written reviews7 reviews
Positive100.0%
Neutral0.0%
Negative0.0%

In-app purchases

3 purchases

Ford PATS Incode Calculator

One-time3
  • 5 Tokens$1.99
  • 10 Tokens$2.99
  • 20 Tokens$4.99
None

BimmerManager

No in-app purchases

Questions

Is Ford PATS Incode Calculator free?
Ford PATS Incode Calculator costs $1.99, and also offers in-app purchases.
Is BimmerManager free?
BimmerManager costs $39.99, with no in-app purchases.
Do Ford PATS Incode Calculator or BimmerManager have ads?
Neither Ford PATS Incode Calculator nor BimmerManager lists data used for advertising in its App Store privacy details.
Which is updated more often, Ford PATS Incode Calculator or BimmerManager?
Ford PATS Incode Calculator ships an update every 5 months, and BimmerManager every 3 weeks. Most recently, Ford PATS Incode Calculator was updated on November 21, 2026 and BimmerManager on November 22, 2026.

Other comparisons