PingPong Robot Bcoding vs RoboidMaker

Bcoding App Experience simple robotic engineering sequences by creating loops with your own buttons, joysticks, music and motion makers that can be controlled with the Bcoding app program. Each robot model requires a designated link to assemble the cube. Find the parts for G1, G2, and G3 in the box. Cube is a single modular robot with controller, gyroscope, accelerometer, proximity sensor, additional sensor interface, stepper motor, battery and more. 1. How to download the Bcoding app: Download the Bcoding app from the App Store. (App Search: Bcoding ). 2.ON/OFF and charging instructions Press and hold the yellow power button for more than 2 seconds to turn the cube on and off. (A beep sounds) 3.Charge 3-1. Prepare the cube. Attach the parts together. 3-2.Connect the charging cable to the circular disk part of the cube. 3-3.The cube and the charger are connected by a circular magnet. More than 100 cubes can be charged at a time. 3-4.Charging time: 6 cubes/hour (charging time depends on the number of cubes). 3-5. If the cube automatically turns off or starts to delay or there is no LED indication, the battery may be low. 4. How to use the app 4-1. Install the app Download the Ping Pong APP to your smartphone or device. (App Search: Bcoding in App Store). 4-2. Run the app Open the Bcoding app 4-3. select robot model select the Bcoding robot model. 4-4. Assembly Assemble the Bcoding model by referring to the APP image. For detailed instructions, please click the 3D Modeling Guide button. 4-5. on After assembling the ping-pong model, press the yellow power button for more than 2 seconds to turn on all ping-pong cubes. 4-6. First cube pairing Check the first cube on the app screen. Press the power button on the assembled robot in the order shown on the app screen. When the first cube connects successfully with the smartphone, a pairing signal and beep will sound. 4-7. Pairing different cubes After pairing the app with the first cube, press the yellow power button on the remaining cubes (follow the order on the app screen). 4-8. play robot The Bcoding app provides various functions such as buttons, joystick, music mode, and motion making. 5. Cube color When the cube is successfully connected to the smartphone, you can distinguish each cube's LED color, specifically in the following order: red, green, blue, cyan, magenta, yellow. 6. Cube Icon Determine the order and position of the ping-pong cubes with various icons such as squares, triangles, circles, stars and hearts.

Roboid Maker is an application that lets you control educational robots you’ve assembled yourself. To use Roboid Maker, you’ll need a Cheese Stick and a Roboid robot. The robot connects to your phone or tablet via Bluetooth. The Roboid series is a line of robots developed for hardware and software education. When connected to a PC, you can program them using block coding (Scratch 3). For more information about the Roboid series, please visit https://robomation.net/?lang=en With the app, you can move the robot freely and try out a variety of actions. Use a joystick-style controller to direct its movement. In the “Motion” and “Action” menus, you can tap buttons to run pre-installed actions. If you already own a Cheese Stick, please click the link below and follow the steps to update your Cheese Stick’s version (firmware) before use: https://robomation.net/?page_id=17403 Let’s dive into the exciting world of robots with Roboid Maker!