EVBox Install vs EVWB Install

Note: EVBox Install is for qualified charging station installers only. Configuring the charging station via EVBox Install app is a mandatory step in making the following stations operational: • EVBox Livo • EVBox Livo 2 • EVBox Liviqo • Mercedes-Benz Wallbox Other stations such as EVBox Elvi, EVBox BusinessLine or EVBox Iqon are configured via the EVBox Connect app instead. ----------------------- With the EVBox Install app, installers can connect to the charging stations listed above and do the following: • Configure the charging station to a local Ethernet, Wi-Fi, or cellular network to enable communication between a charging management service provider and the charging station. • Set the maximum charge current. • Configure the current balancing features. • Provide station firmware updates. All the steps to successfully complete a configuration are explained inside the app. Do you need help with installing the station? Consult the charging station's installation manual.

EVWB Install is an app designed for professional installers to configure and maintain EVWB charging stations. EVWB Install supports all models, including EVII LITE, CLEVER, C&I, C&I PRO, and Twin. Once configured with EVWB Install, the charging station can be connected via the EVwallbox app, third-party apps, or a CMS. Before connecting the charging station with the EVWB Install app, ensure the following: Your phone has a stable internet connection and Bluetooth is enabled. EVWB Install connects and configures an EVWB AC charging station via Bluetooth. With the EVWB Install app, installers can: - Power Settings: Configure power grid settings, such as maximum charging current and earthing system. - Connectivity Settings: Choose the connection method for the charging station (Wi-Fi, LAN, or 4G if available). - OCPP Settings: Configure the charging station to connect to a third-party OCPP back-end or default to the EVWB back-end. When configuring the charging station to connect to a third-party OCPP back-end, please ensure: -Consult the third-party back-end support to determine whether a specific Charge Point Serial Number is required for connection. -The charging station takes approximately 3-5 minutes to verify the security of the link. After verification, it will automatically reboot and attempt to establish a connection. Check the target back-end (portal or app) to confirm successful connection. We are committed to improving the installation, configuration, and maintenance experience. Ensure that the EVWB Install app is updated to the latest version. If necessary, update the charging station firmware as well. For detailed installation instructions, please refer to the installation manual. The EVWB Install app also provides online documentation for reference. For the latest installation information, visit our official website: https://www.evwallbox.com.