Mini4WD vs Kep1er Light Stick

It is a timer application that can measure the lap time, fastest time, average time of Mini 4WD with the camera. Manual measurement is also possible. [How to use] 0. From the setting menu, you can set the passing sound, vibration, number of lanes, number of measurement laps, course length, detection sensitivity, unit, etc. 1. Select the number of lanes. If you are not sure, please select 1 lane. 2. Set the number of measurement laps. Measurement will end automatically at the specified number of times. 3. Set the course length. It is used for speed calculation. Even if it is not set, it does not affect the measurement. 4. Secure the device so that the selected lane and course match. Even if it deviates a little, there is no problem as long as it fits within the range where the Mini 4WD can pass. 5. Tap the screen and wait for the Mini 4WD to pass first. 6. Run the Mini 4WD. 7. When the specified number of measurements is taken, the measurement is completed. You can see records from the button at the bottom left. Records can be transferred to twitter, memo app, or email with the Share button. * Long Press to interrupt the measurement and return to the TOP screen. * Manual measurement is possible with the button at the bottom right. It can be used for simple measurement from outside the course. * Detection method The passage judgment of Mini 4WD is regarded as detection when the average brightness of the shooting frame pixels of the camera exceeds the set sensitivity. When the sensitivity is 85, it is detected that the average brightness before and after the frame changes by 15%, When the sensitivity is 90, it is detected that the average brightness before and after the frame changes by 10%, When the sensitivity is 60, it is detected when the average brightness before and after the frame changes by 40%. If you fix the device, the accuracy will increase. Even if the camera shakes without fixing, it will not be erroneously detected unless the brightness changes significantly.

[MAIN FEATURES] 1. CONCERT MODE Pair your light stick with your concert seat information to enjoy various light stick performance during the concert. This menu will only be available during the concert period. 2. CONNECTING TO BLUETOOTH ON YOUR SMARTPHONE Press the button on the light stick for 3 seconds to set up the “Bluetooth mode”. Turn on the Bluetooth function of your smartphone and hold your smartphone close to the light stick to sync them together. Some smartphones require the GPS function to be turned on to enable Bluetooth connectivity. If you cannot connect to Bluetooth, please turn on the GPS function. 3. SELF MODE When your light stick is successfully connected to your smartphone, changing the color on the color wheel of the app will change your light stick color accordingly. 4. BATTERY LEVEL CHECK In the “SELF MODE” page of the app, click the “Check Battery Status” button at the bottom of the screen to check the battery level of your light stick and replace the battery if needed. ※ This function may differ depending on battery performance and smartphone model. [NOTICE BEFORE CONCERT] - Check the seat information on your ticket before the concert and enter it into your light stick using the app. - To take part in the light stick performance, be sure to set the light stick to “Concert mode” by pressing its button for 3 seconds after pairing it with your seat information on the app. - If the light stick’s wireless performance does not work properly, it may be due to unsuccessful pairing or not completing the pairing process. Please complete the pairing process using the app. - Please be seated in the same seat you registered for your light stick. Moving to another seat may result in different light stick performance. - Check the battery level of your light stick in advance to ensure battery sufficiency during the concert. - There will be a Wireless Control Fanlight Support Center located at the venue. [REQUIRED ACCESS] To use the app and the light stick, the following accesses are required. ※ To grant access, please tap the [Allow] button when the pop-up appears. - DEVICE STORAGE: To store the QR/barcode, seat information, etc. - PHONE: To read the phone status and its identity - CAMERA: To read the QR/barcode - GPS: To connect to Bluetooth - BLUETOOTH: To connect the light stick